Recent content by AllenW

Pour gas on it and let it evaporate may take a few times. No smoking

Not really a heavy equipment mechanic but have a few suggestions. Check intercooler piping and boots also check end play on turbo. Basically wiggle the shaft and make sure it isn’t flopping around Sent from my iPhone using Tapatalk

Stock block maybe Sent from my iPhone using Tapatalk

Check out lt1swap.com. Best info I found on what to keep and what to cut Sent from my iPhone using Tapatalk

How can I get in touch with you interested Sent from my iPhone using Tapatalk

Where at Sent from my iPhone using Tapatalk

Yep real close. Put 2 of them on the 05 I had. Sold it with the abs light on no more 3rd gen dodges for me Sent from my iPhone using Tapatalk

Intergraded power control module is a possibility also. Basically the under hood fuse block Sent from my iPhone using Tapatalk

In my opinion most units are very comparable. Most problems I run across are installer related on split units if it is a split try to be there and make sure the installer evacuates the system correctly using a micron gauge. And make sure the warranty card is sent in or registered or...

Re: BFG and Maxxis Stickies 39 reds to 35811 Sent from my iPhone using Tapatalk

They sell or still available Sent from my iPhone using Tapatalk

Re: Jimmy Smith buggy & Parts for sale Any more info on chassis Sent from my iPhone using Tapatalk

Re: Ls troubleshooting Try running a temporary ground from battery to ECM grounds. Sent from my iPhone using Tapatalk

How about some more pics of the chassis Sent from my iPhone using Tapatalk

Re: Ls troubleshooting If you have access to noid lights you can verify injector pulse. Sounds like vats activating Sent from my iPhone using Tapatalk