Recent content by b.boyd

It will break the die tab on the die. Also it will bend the pins. Also, the way the main arm is made with holes right next to edge of the arm will be a problem.There is not enough meat around the hole.The result will be that the hole will oval and eventually break. You can fix these problems as...

if only you were closer than kansas. damn it.

Coming from someone who uses a monster Ron Davis radiator (trophy truck) that is dual pass, there should be a seam in the tank for it to be dual pass like everyone has suggested. Unless the seam in the tank is hiding behind a fan blade in that picture it would appear to be a single pass...

I own a ron davis full radiator/fan set up. 36 inch long , dual pass, with TWO 16 inch fans. It is by far the best radiator set up I have used in 25 years of offloading. In fact i almost never turn the second fan on. Maybe for a 20 minute beatdown and that's it.. blows griffen, howe, and be...

sent you a text .let me know if you do not receive it. thanks

Using a 2.5 inch ram will result in "quicker" turning or less turns lock to lock. As for being easier to turn, if you have a pump up for the job a 3 inch ram has more power than a 2 .5 inch. However, the headaches of getting a 3 inch ram to turn quickly and keeping the steering pump happy is...

On the ram "throw" , aka length, the rockwells actually take a 9 inch. However, 8 works fine with rear steering . A 10 inch typically requires a limiting spacer either internally or externally to limit the travel of the ram. Being that you have rear steer, an 8 inch throw vs 10 inch really...

The orbital you have is certain very small particularly to be powering such a large ram. Speaking of the ram,part of your problem is a 3 inch diameter ram. That size ram is excessive. A 2.5 inch ram combined with an orbital in the 9.7 c.i. or 11.6 c.i .displacement would put you very close to...

back in the mid 90's Beasley Knob was good place to ride. Quite steep and a few pretty damn good climbs back then. Like most thing the US Forest Service touches, crap now or gone. Another place outside of Tellico that was good was Little Buffalo in Robbinsville. Hardly anyone knew about and it...

Don't forget zipties or you will be "That guy".. :drinkers:

As the title says , looking for a TH400 version NP205. PM me or let me know here if you have one for sale. Thanks.

I have a set of stock tires on rims. Would make spares if ur interested.pm me.

Can do it on a lathe to.

I sent you a private message. Please look at message as I am willing to drive up there. Thanks!

Looking for a Chevy Dana 60 front housing. Inner c to inner c..if it had 410 gears would be even better. Please pm me or text 931 6363 2425 if you have one. Thanks