Recent content by bbtank45

Awesome looking buggy, love that it has an LS3. I found an old tonneau cover on craigslist (back when it was cool) for cheap and chopped it up, used grommets and zip ties as well.

Actually, I really like my Harbor Freight one....and all the consumables are stocked at HF as well. https://www.harborfreight.com/air-tools/paint/20-oz-professional-hvlp-gravity-feed-air-spray-gun-68843.html

Re: KRC power steering pump What were you running this on? Engine and ram size. Considering for an LS and want to see if this pulley will need changed

After last year, i didnt think the announcing could have gotten worse. Proved wrong. Much better broadcasting otherwise. Sent from my SM-G950U using Tapatalk

Not sure if you got the barrel hinges off Amazon, i bought a set for a different project that look to be the same. https://www.amazon.com/gp/product/B01DMFHRG4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

If you use spray foam in your walls, how do you feed or pull new electrical circuits in the future? Seems like it would be a bitch to try to fish wire or cat cable. Maybe im the only thats always moving data/electrical around in my house tho.

Been doing some research on them lately.....like Eddy, i bought a Hypertherm 45XP recently. Any recommended brands? or brands to stay away from? Seems like you can really get some junk and some headaches if you arent careful. Thinking in the 4'x4' range.

Hope it gets purchased and remains a park....went there for the first time in August, had a great time despite the super wet conditions. One of the guys in our group got swallowed by the hole on Trail 2. 20180810_162902 by Ben Burwinkel, on Flickr 20180810_162919 by Ben Burwinkel, on Flickr...

Awesome place to ride....plenty of challenging obstacles for several days of wheeling. I was down there over Labor Day weekend and stayed at Bearwallow Campground @ Trailhead. I would highly recommend for someone looking for a new spot to wheel.

Ouch... 20180902_195441 by Ben Burwinkel, on Flickr 20180902_195445 by Ben Burwinkel, on Flickr

1-2" of preload and 150psi of nitrogen and see where it sits...... what ive found to work. Have you messed with the valving yet?

Ive had great luck out of my SpeedHut gauges.....there customer service is among the best ive ever dealt with. https://www.speedhut.com/

Could you purchase a piece of 1/2-20 hardened threaded rod and cut to length?

I actually noticed the threads were pulling on certain bolts when i was building the axle....i wheeled it anyway. Eventually I was down to only 3 of the 8 bolts actually holding torque. I took a new 14 bolt hub and put studs in it to fix. Got the idea from a thread on here...

Going to go check out Bearwallow for the first time.