Recent content by benw1

Thats cool. How do you like the Yanmar? Looks like a 2010?

If it is less than 3hp, get a VFD that is single phase in 3 phase out. If you have more than 3 hp, use a rotary phase converter. If you use a static phase converter you lose about 25% HP. Static phase converter just starts the motor, then it drops out and the motor runs on single phase.

Set of 4 37x13.50x17 Toyo MTs on 2007 Jeep Wrangler rims. Lots of tread, good condition. $800. Located in Yakima.

Universal j-bolt style hold down works fine with the YJ tray.

Warn 9.5xp is your best option.

How are you going to run a Dana 300 to a YJ front 30? Why waste time with an ancient TBI. If you are going 4.3 get the newest one you can. They are so well supported now there is no reason to waste time with a crusty old under powered TBI.

Are the dash pictures just a replacement of the bulbs with LEDs or is there more to it? Where did you get the bulbs?

No, you need an advance adapters bellhousing.

If you're going to buy an expensive bell housing adapter just use an ax15 out of a 4.0 jeep and a Dana 300.

This. If they are spinning you are screwed. If you take the dash all apart you can reach the nuts with a wrench.

Build-it Offroad in Gleed does nice DIY beadlocks. http://www.builditoffroad.com/

Maybe it has gears from a Toyota 1 ton cab & chassis or motorhome. Those are 1 ton, but they aren't 8 lug. Its all so confusing.

Anyone run the Pro Comp MT2? Wondering how they do in the snow...

Did it, ran it for years no problems at all. I'd do it again in a heartbeat.

I'd guess highs in the 50s and cold at night. There will be moisture, good chance of precip. Perfect time of year to go, no dust.