Recent content by boxer1

I have a sway bar mounted on the rear. Also have air bumps on all 4 corners.

So just so I’m sure I’m talking about the same thing , this is referred to as compression/rebound. I started with 50/70 compression /rebound. I changed to 50/50 because it was suggested that that would take away some of the harsh ride. You are saying you want more compression than rebound which...

I had torn the front four link out and bent the front shock shafts my last trip out so I have been rebuilding that I finally got the bent shafts swapped out this weekend and adjusted all the shocks to a 50/50 setup. Hopefully I can get out in the next couple of weekends and see what the...

mac5005 when you say "Ex: You may end up with two .008 shims next to the piston on C, then a .010 very small fulcrum, then a conventional pyramid stack after. " what do you mean by .010 fulcrum? cdemart2 when you say "Put at least one away bar on it and put a 30 stack on the rebound side. "...

1” preload. Emulsion shock. 7” up travel on a 16” shock. This is not a high horsepower buggy it’s more for rockcrawling not rockbouncing. Front springs are 150/200 and the rears are 100/150. Both are set up with 50/70 rebound/compression. I’d have to go check on the pressure.

Looking to take some of the harshness out when General Trail riding and in rocky bouldery trails. Thinking about putting a flutter stack in. If I currently have a 70 compression rate would you use the first (largest OD ) shim out of a 50 set up and then like the 4th or 5th shim our of the 50...

I have 4 -42x15x17 Pitbull Rockers with 80% tread left. They all hold air and have no patches. They have standard rock rosy for an Offroad tire. I’m asking $1100 https://imgur.com/a/dHfJh1i https://imgur.com/gallery/1JDesoC https://imgur.com/gallery/Dn3rv36

Going out to Hawk Pride for the first time in a couple of weeks with a mixed group from 37’s locked front and rear to a couple of buggies. Just looking for a list of the can’t miss trails so we don’t have to go searching the whole park. Thanks for any advice.

I have front and rear 78/79 ford dana 60 spools 35 spline. $100 each but I'd like to sell as a pair if possible. I'm located near Canton GA for local pick up. I will be at Trailfest at AOP next weekend and can bring them with me.

Does anybody know if Morris Mountain is open next Saturday June 11th? We got a small group wanting to go ride and I know they are only open certain weekends. Thanks for any help.

Where is the best/closest place to stay near the park? My group has never been out to this park and we are looking at checking it out later this year. Thanks

I'd guess your about $3000 to $4000 to high.

Does anybody know if Morris Mountain will be open on the weekend of February 6th 2016? I know they are open either the 1st and 3rd weekend or the 2nd and 4th but haven't been able to confirm which it is. I have a group wanting to go ride that Saturday.

That's my buddys jeep buggy in the background. Just so I don't change the subject of the thread you can PM me for more info. Short version totaled his 1 ton YJ last year at Dixie Run and decided to get a evolution chassis built with a jeep theme. I think its the first evolution chassis built...

Re: 8 - 1.25" chromoly heims Sale pending. Sorry for the confusion. I was gone all day yesterday at AOP and it was more of a joke about 6 for $300. I'm meeting Kush this afternoon.