Recent content by Broken Again

The track marshal in the red hat is my buddy Quinn. Quinn's rig here... http://www.nw-wheelers.com/forum/showthread.php?t=61834&highlight=quinn

One way to freak out some New Yorkers.. http://www.liveleak.com/view?i=1f1_1327966906

X2 on the last 2 posts. Chromoly can fail if not heat treated. I saw first hand a couple of weeks ago when my friends buggy frame broke in crash. There were 10 or 12 broken TUBES in the heat affected zone next to the welds. Each tube broke about 1/8 to 1/4 inch away from the weld joint. This was...

If you are disabled you can get a pass for free or in some cases not even need a pass. I have a National Parks/Federal Lands pass to get in free at places like Yosemite etc...and a CA disabled pass to get camping etc for 50% off. Check the above mentioned websites for details if you...

Mike, You have done an outstanding job on this.....your dad will be proud. Steve

FWIW...I have used nitric acid to remove steel studs in alum heads... Just don't use too much and flush like crazy when done. Another method I use for removing broken taps etc, is to grind a carbide bit to a chisle point then plunge the hole at about 2000 rpm with .3 IPM feed...lots of...

I'm old school too. When I was an apprentice, my "master" gave me a box with about 500 old bits and told me to have at it. He gave me some direction about drill pointing. I learned about chisel and split points, primary cutting lip and secondary heel clearence. Then learned about different...

Keep it simple...Might want to check your belt too.

I did both, good high output alt + dual redtops. I use dual Redtops because I sometimes use a ReadyWelder2. Also, I like having the 1820 amps to winch if the motor is off.

If you want it waterjeted, you will need to supply the guy with actual numbers to cut to. Or give him your part and pay him to come up with the numbers as waterjets are Computer Numerical Controlled.(CNC) I can machine it, but I'm in San Diego(no rain here:D) If it were me, I'd just lay it out...

Not even finished and you already have it high centered on a log.:D Nice build.:awesomework:

I get it...throw on the cookie cutters...pass the gate....remove cookie cutters and re-install the real tires.:haha:

Wow that brings back some memories.... Made me think of Pokeys(different Pokey...this guy is my friend Bud Boren) Attitude Adjustments. http://www.jeepaholics.com/attitude/attitude.htm

Try this...(windows only) click "all programs" select Internet Exployer NOT Internet Explorer (64 bit) Re-log on... Then try again with the 32 bit explorer.(standard IE)

My nephue Ross bagged a nice elk in nothern Elco Co. Nevada. My brother Matt helped him pack it out. http://www.youtube.com/watch?v=XpZnONkyiog Matt's e-mal to me... "Check this out! Ross got his archery elk in Nevada. It took eight years to draw this tag and he filled it on the second...