Recent content by greyghost1

Pictures of the pbr? Text them to 206 549 5534 please

I know, she didn't think I could convert it to a 4runner and not have it fall apart the first time out either

Thanks, I think I am going to go bright with the color probably green to match the beadlocks thanks man, I see you went to evans the day before we went, I will let you know if I can remember to pm ya before we go again.

2nd trip out in the runner we went to Evans Creek ORV on Sunday, everything worked great except for leaking alittle gas. I noticed at first when going downhill I could smell gas, the gas was going up to my vent that I had installed out of the toyota tank and getting sucked into the charcoal can...

Finally got to go test it out on Sunday, we went to Walker Valley for the day, everything worked just about as good as it could, I have a couple of spots to clearance for the tires but it still worked just fine. 87/4play cant forget the burrito basket The only thing I F'd up...

I added a plate under my fenders to tie the front of the cage into the body by the kick panels, I had to pull the fuse panel and computer away to make sure the heat didnt melt any wires Added braces to the rear bumper, I still am going to add a reciever and lower tube to the bumper to finish...

Mounted the iroks, hooked up the fuel lines and fired it up, patched in the rest of my rear fenders and took it out to my buddies house for alittle body work. Had a couple of friends help me mount the beadlocks, all those bolts take forever :D Here are the patch panels to finish the...

I have done alot to the rig and have not updated NWW, here is the update to current. Ford tank, we installed a tube crossmember through the end of the frame and welded it inside and out. Next we mocked up the tank to figure out the front crossmember and shock mount. Here is the shock...

Working on the beadlocks tonight, I got a helper too, she is super excited :p We are working on making a anti cone ring, I am using 3/4"x 1/8" and just tacking it and bending it as I go here is on of the rings set on to show how its going to look My wife blasted all of the outer rings for...

Make sure you line up your flanges with the pump bolted in them, they are clocked, we welded in the flanges then found out the pump was facing the wrong way and my sending unit was going right through my pump, easy fix if you do the same I just redrilled a couple holes and they fit once again...

Made some progress with the gas tank, I am going to use a Ford F-series aux tank out of a 92 pickup it is the 18 gallon one the dimensions are 34.5x26.5x8 First things first, pour out as much gas as you can out of both tanks and open up everything that can be opened then toss in some matches...

just picked up my new tires, 37x14x17 bias iroks 17x9 soft 8s, I had the wheels made with 3.5" BS instead of 4.5" for a little extra width I picked up the rest of my tubing for the cage and rear bumper last weekend and bought my beadlocks from D&J Customs, I chose to clean them up myself so...

That is all I found also, I hope its the only one out there when I'm done!

FRONT BUMPER IN THE WORKS SOME GOODIES

I have been working on this for awhile and finally finished the SAS and got it out on the trails a few times last year TG springs, duals, 4.7, triple sticks, Longs, locked F&R, onboard air and a bunch of other goodies Since I have kids the extra cab was too small and I needed to do...