This is a test fit of the crossbrace to the inner framerail side of my bracket before I tact welded it.
Another couple test fit pics.
Here's how the frame bracket looks from up top prior to me welding it.
When all is said & done, it will look similar to this except with some primer &...
Made some progress between doing other less interesting household chores.
Anyway, here's how the clamp looks as I tact welded it & was doing some test fitting. Take note of the left side of the clamp; I was using a small 1x1x~1/2" thick washer between the clamps ends. I'll be using this washer...
I decided to build my own steering box brace & while I was at it I figured I would do a step-by-step mini write up incase folks are interested.
I started things out by droping by a local metal supply shop & picked up a piece of 2 7/8" OD x 2 3/8" ID x ~.188 wall x ~1'.
I tossed it in my chop...
