Recent content by Last Rebel

Late model pick up J20 match set Front is 44 don't know gear ratio. Rear end is a 60 don't know gear ratio Asking $800.0 for both. Will not sale separate. Please call Tammy Ellis 770-843-2620 Thanks

Congrats Tony on getn in a magazine. Now the next time you come by the house I would like my copy autographed. see ya.

we put a 6.0 in a yj. we didn't have any issues with the pump in it's stock form and it has been steering 39 inch pit bulls since it was built. he didn't have the money to install hydraulic assist during the build, so we ran without it for awhile. no issues. we installed a PSC ram assist...

My brother and I just fixed this in his dana 20. We to tore the stupid thing down several times. the jumping out of low range with a twin stick was part of the problem. we installed a 3 to1 gear set. make sure the out put shafts are within spec on the end play and the pre load on the bearings...

wheel base is 102". the uppers and lowers are close to the same. I put it where it would fit and it was close with the exhaust, but it had to be re-ran due to the 4 link in the rear. the pan hard bar was the main problem and it is a close fit using a steering box. it is parallel to the drag...

I did a 3 link on mine last year. There are detailed pictures in the tech and fab section. I don't know how far back down the list it is, but if you type in cj in the search tab it is the one that is listed as cj-7 link project. julio took a lot of detailed photos. I hope it can help you out.

we put one in a jeep yj a year ago. we used a howell fuel injections wiring harness and it deletes all the don't need junk. we had a computer and used it as a core. they sent us one that was already flashed to remove the things we didn't need. it costs about $600 for the harness and $200 for the...

hey ya'll now you have to ask julio just how and why that front axle housing broke completely in half. he tried to pull some of that old school dukes of hazzard stuff and it just didn't work out. now julio you tell em just how that happened and don't leave nothing out. lol.

Just signed the on-line petition. I hope it gets put to good use. Can't keep loosing places to ride!

I have a full size spare tire and a 22gal. fuel cell not to mention other odds and ends. 450lbs seems o.k. for mine and it doesn't act like a slinky at speed or around a corner. I drove it to the mud bog and it is a little stiff if you jump a rail road track going 50mph. Not anything I can't...

what the hell did you do? or do i really want to know.

The coils fit 3" coil over shocks. That is the i.d. of the spring.These are made by hyperco, but you could use any manufacture with the same results I would guess. I lucked up on mine and have 450# coils on all four corners. I have a 38" spare tire on the back and a 22 gallon fuel cell. Mild 2...

Going to have the exhaust ran on wednsday. I buttoned up alot of little crap on sunday. Everything looks good so far, but I haven't drove it yet. I guess we'll see on wednsday. I'll call you and let you know.

Julio is gonna take pictures of fire one way or another. It can be coming from a grinder, a welder, or a house fully engulfed. It's just a fire thing I guess. You can't keep him from play'n in a camp fire either. ha ha ha

Well I'd like to see how mine operates before I just fly in on another one. I'm not say'n I won't help you out, but give me a minute to catch my breath. Julio sho does take some cool pictures don't he. I found that one of my old shocks on the front end is shot from years of abuse, so I'll have...