Recent content by lizard lips

  1. L

    Lizard Jeep Rebuild

    A bunch of progress has been done on this but here's the pics. Cycling the suspension. The ****ty pics are a camera phone. I'll get detailed pics later Since the last update. Cage, hydro, bumps, and everything else have been done.
  2. L

    Lizard Jeep Rebuild

    some more updates. Started on the shock hoops. still have to finish bracing them and finishing the engine cage braced the 3rd link. Still am going to do some more to it. axle shock brackets shock hoops started. full droop ride height and some lame ass pictures of trying to cycle...
  3. L

    Lizard Jeep Rebuild

    also finished all the mounts and put the links on 3rd link Frame panhard rod lower link mount and axle panhard rod This is full bump for the front. The wheelbase sits now at 116.5
  4. L

    Lizard Jeep Rebuild

    did some more work this weekend. braced the lower links driver side with the 3rd link tied in I also started on the crossmember. This is all I did before I didn't want to do anything else
  5. L

    Lizard Jeep Rebuild

    not many too updates today. I used some brackets I had laying around to start the front of this thing. My lower link brackets never showed so I am waiting on those. Here's some stuff that I'm mocking up. Yes I will be using pvc pipe it's super strong and flexable! :flipoff: passenger side will...
  6. L

    Lizard Jeep Rebuild

    wheeling is pretty good down here. You just need to know where to go. A bunch of trails near town are being closed. They keep building houses right up to the mountain.
  7. L

    Lizard Jeep Rebuild

    well did a few things lately. Went from some 14" coilovers to the 17" Bilstein coilovers I had laying around. rear driveshaft, 1410 yoke new upper shock mount new axle coilover mounts. picked up a lokar shifter. Not sure if I like it yet but we'll see what happens and just a little...
  8. L

    Lizard Jeep Rebuild

    some small updates. Not much. Messing with the ride height This is full droop. 14" coilovers another shot of the rear mounted the tank again. overall shot. wheelbase 115"
  9. L

    Lizard Jeep Rebuild

    Yeah I'll be bracing the coilovers from up in the cage. Also going to be adding more braces and more everything.
  10. L

    Lizard Jeep Rebuild

    hell yeah the cops stopped us working on it. you know cutting wires with wire cutters gets pretty loud. Nevermind the guys hot rod down the street reving in the garage with cutouts. :flipoff:
  11. L

    Lizard Jeep Rebuild

    yeah and the ****ting thing is I found it for him and didn't have the cash at the time. so he picked it up. Yeah we have to make the holes bigger for the coilovers. We still have some work to do on it
  12. L

    Lizard Jeep Rebuild

    some update for the weekend. Finished the rear suspension. 14" coilovers. need to get different spring rates and then I'll be set. coilover mounts. Used 1/2 misalignment spacers for the coilovers axle mounts the rear axle done except for brake lines and driveshaft. ride height this...
  13. L

    Lizard Jeep Rebuild

    A few updates for the weekend. Put a brand new tranny in. gonna mess with the coilovers for the back today and bump stops
  14. L

    Lizard Jeep Rebuild

    some updates over the weekend. Cut all the old 4 link stuff off and redid it. Move the axle back as well. lower axle mount Upper and lower frame mount. finished pic of the rear this is at full bump just screwing around with the movement of the links. Maybe this should be the new...
  15. L

    91 truggy build

    yeah flux core. Sorry the pics are ****ty. The camera is at work and I'm not going there when I don't have to. I'll get some better pics up next week. there are the only other pics I have til I get my camera. I also got a box of brackets for the front 3 link and a ifs toy box tapped for hydro...
See more

Latest posts

Back
Top