Recent content by mna0121

I was there Friday night.

The Griffin rad will be fine, I have a $20 yard sale unit in mine, 422 ci LS. Fix the leak. Spal fans with custom shroud that covers the entire cooling surface and most important, ad an expansion tank. The tank doesn't have to be huge but needs to be the highest point in your water system and...

Y'all know I would have been there is any way possible! See y'all at Hardrock Ocala Fathers day weekend. Good pics btw. RTR

Does anyone have pics from this ride, web wheelin here. RTR

Did you tear the engine down if so what locked it up, spun bearings on the front throws? RTR

If one of the cylinders was full of oil and y'all started it, it could very well have a bent rod. The knocking would start sooner than later like as soon as that cylinder compressed. Pull the pan rotate and inspect each rod on the down throw with a good flash light pay attention to the big ends...

Re: Our KOH Story, Condensed version Torsion axle failed. No more torsion axles Please expand on this a little. How did the torsion axle lead to both tires blowing? Without moving up into a heavier class trailer what is a better choice axle than the torsions? RTR

X2 for Viper RTR

Is that at Lane's

That is what I was thinking. I found the part number for the TAC and ran it on a couple of part sites and found nothing after 07 I think. So all I really need is the pedal itself? Is there any of the wiring harness I need from inside the cab? RTR

I followed the wire from the connector and it quickly goes into the wiring harness. I even removed the lower dash and still can’t find a control box for the throttle pedal so I got on the computer for research. I Found out what we are talking about is called the throttle actuator control module...

I did not get the pedal box, where is it located? I have the entire drive train and it is a 14 bolt. RTR

I got all of that except the elect connections that go through the fire wall into the cab. I removed the gas peddle connection at the second connection, do I need anything else from inside the cab? I even took the trailer brake controller and horn. RTR

A while back I traded my junk yard buddy out of a 2011 2500 van. My dad and I got it running (fuel Pump) so I drove it around home quiet a bit. It runs like a top and a shame to take it apart but I can't get it titled. This weekend I finally got around to taking it apart. I removed the body from...

Thanks, Barton I have it listed there. Not sure how many people go there, I hardly ever do. RTR