Recent content by OffRoad Cowboy

Whidbey 4x4 is meeting at 8:30 am at walker's. I will be there driving a 90 blue yj.:awesomework:

Anybody going out on the 1st?

Yep, 9:30-10:00

I have a blue 90 YJ on 35's and a locker. I'll be more than happy to give you a yank if you get stuck.

I plan on going Saturday also!

I plan on being at the main lot around 10:00, is anybody else going?

Looking out my kitchen window, I see the snow line at about 1500 feet. I would say that humps & bumbs has snow.

I'm converting a '86 14 bolt to disk. Does it look like I got the setup correct? It looks like it maybe too far in, but I don't see any other way. It is mocked up so I can build the bracket for the caliper.

I got the long block ( block and heads ) from my brother. It was a new crate engine for a van at Chevy dealer. They put it in and said it had a deep knocking sound. So they took it out and where going to send it back, but he gave it to me. My next step is to pull the pistons and crank. So I'll...

I got a free 5.7L small block. When I pulled the head off this is what 3 of the pistons looked like. Can anybody help me out? I was thinking debris got into the cylinder, but why 3? I was also thinking detonation problems or maybe the spark plug was too long. The plugs where not installed. There...

I plan on being there about 9 to 9:30. I have a blue 90yj. There is camping there. Have a d-pass.

I'll be there. Blue 90 YJ.:cheer: Kevin

I put 4.88 gears in my D30 and didn't need to grind anything. When I put the 4.88 in the rear ford 8.8 I did have to grind a little off the inner tip of one gear tooth. Did they replace the carrier housing? Going to 4.88 gears this is a must.

Stuck with the work thing also.:mad: My rig is also apart. I'm building front tube fenders.:awesomework: Have fun and maybe next time.:D