-
Help Support Hardline Crawlers :
paradisepwoffrd's latest activity
-
Pparadisepwoffrd replied to the thread Coalmont TN OHV New Park info.I was thinking just that. Figured someone with a brush cutter and 4wd tractor could likely have their trails clear in a few hours.
-
Pparadisepwoffrd replied to the thread Custom PRP seat garbage.PRP and Mastercraft made seperate headrests in the past. Not sure if they still do.
-
Pparadisepwoffrd replied to the thread 6L80 Tap shift issue.Just for future reference, are you just using the RADesigns with Winters shifter now, or need that plus the speartech module to get auto...
-
Pparadisepwoffrd replied to the thread 47" sticky bogger.88/32 tread depth is crazy... wonder if they can be grooved for more like a 44"?
-
Pparadisepwoffrd replied to the thread Custom buggy hauler.What about putting expanded or grate down the center? It still is open to drips/cleaning but you can lay on it. You could have the...
-
Pparadisepwoffrd replied to the thread Suzi Q Samurai buggy build.That pic doesnt show the half of it.
-
Pparadisepwoffrd replied to the thread Kid crawler.I suspect you will want to step up to a 33" tires quickly. Even though the 8v is anemic, you have alot of gearing there. Also check...
-
Pparadisepwoffrd replied to the thread Low Budget rear engine, 37"s.But the math using 32.2ft/s2 to actually prove 1=1 is interesting.
-
Pparadisepwoffrd replied to the thread For Sale TJ Buggy for sale - $18K.@77GreenMachine
-
Pparadisepwoffrd replied to the thread Low Budget rear engine, 37"s.Only thing about metric that bugs me, is kg isnt a unit of weight, but a unit of mass. Im sure that is based on using weight for...
-
Pparadisepwoffrd replied to the thread Kid crawler.Just FYI, the sami axle is narrower than the kick. The kick rear is closer to a toyota width. Most that have put the sami axles, run...
-
Pparadisepwoffrd replied to the thread Custom buggy hauler.I really like the dedicated rig trailers too, mostly since it gets the rig down out of the wind. My biggest concern, is trying to load...
-
Pparadisepwoffrd replied to the thread Kid crawler.I believe you can put the kick gears in the sami third. I recall there being an adapter or something. The steel housing is stronger...
-
Pparadisepwoffrd replied to the thread I have no idea what I'm doing aka the worst Ultra4 4400 build thread on Earth..gotcha. In the last pic, it looked like the top of the fairlead would be even with the hood.
-
Pparadisepwoffrd replied to the thread Custom buggy hauler.I would go 7k axles and 20-22ft, just for the options. If the buggy is what its going to carry 90% of the time, that might be overkill.
