Recent content by redx08

Got alot done today, and it is sitting on all 4 tires. The wheel base is 118.5 inches, belly height is 20 inches, and 79 inches to the highest point on the hard top. I have 5.5 inches of up travel in the front and will have about the same in the rear. A big thanks to redbarron, ying yang...

Got a little done tonight. Got the upper link mount set, and the frame rails cleaned up to mock the coilovers up tomorrow. Had to cut the stock track bar mount off the frame, but it is worth it. The front axle is stretched about 2 inches. Also ballistic came through and I received my truss...

A 4 door with 42s? If so i have talked to that guy a couple times about his. How did the install go?

Got a little bit of work done saturday. All the frame side mounts are done. Seems like every two steps forward we took , we needed to go 3 steps back. We ran into some issues, but atleast most of them are out the way so the build can go a little quciker now. For future jk knowledge a sterling...

Got the axles out. Also cleared the rear wheel wells. Got angry with hammer and I gained about 2 inches of clearance around, and I cut about 2-3 inches off in the rear. I am hoping to make full bump an inch or two lower, maybe three. The tire is not completely seated on the bead. Tires...

Got some more parts in today, getting a little closer to actually getting started and wheeling this thing again.

had a nice gift arrive at the house today while I was at work. ORI should be shipping soon, solid axle hub converison should be shipping this week, and still alot of other **** I need to order. Hopefully you should see some progress in the not to distant future.

Nice pivtures, Did he do the cage work in the jk himself?

The solid axle hub conversion will have tone rings in it with 55 teeth, the jk is 52, and the rear sterling has a tone ring at the diff. Ill play with the sensors and the tipm to get it to function correctly.

No just a little screwy in the head. :****: and a very patient wife.

I know I have owned one for 3 years. :dblthumb:

Just winging the axles, the ori will mount on top of the axle and probably go into the tub. Planning on some frame work in the rear by the ori

Burning the perches off Welded the tubes of the axles I did not weld the tubes, a friend welded them for me. The ORIs are on order and should be here in 6 weeks or less Going with 5.38s, detroit rear, spartan front is the plan. Once I have some more parts in, some cutting and welding will...

Planning a little build on my jk. I wheeled my jk on 35s for a little while, but was ready for some upgrades. Going to put a hp 60 and sterling 10.50 in it, with 14 inch travel RRD coilovers from rock krawler in the front, rear will be 14inch ORIs, rock krawler long arms upgrade, and 39.5...

I have the axles, coilovers, suspension, and going to order the ORI at the end of the month. When I actually start the process ill post some pictures up. Hopefully will be running 42 inch pitbull, but will see what is the for sale section when it is tire time.