Recent content by rockbuggy

I am from the NorthEast (New Hampshire)

Mine

More info on this TKES 450 Hp ls1 Please

Here in the North East look for any return line that goes through a Metal bracket holding it to the frame as the bracket rusts it will push in an collapse the line. We have run into this alot on front break lines in cars. It will restrict the flow and cause all kinds of problems. 18 psi is...

Stock Fuel Pressure for Big and Small Block TBI should be 9 to 13 pounds Except for a few years 1994 and 1995 Big blocks Only I think then it was 26-32 or something like that with a smaller injector. (They will actually run of a mechanical pump but will not run well) My Voltage guess was a...

Whats the fuel pressure on both the feed and return? Is there any change as it warms up? Will the engine rev up and smooth out or does it sputter and spit at any rpm when cold? Does this have the heated adapter between the tbi and the intake or is it using a tbi intake? Have you looked...

Re: EOR 321 3 Seater Chassis Build Build Looks great. When I mounted my 203 - 205 doubler like that I did this to the back of the trans. Maybe you will have better luck. My motor was not solid it was mounted in Polly bushings but the trans mount was the same. [attachment deleted by admin]

This works for my friend

This is how my friend did his Assist but there is no reason you could not do the full hydro like this as well.

The Idealarc may be more disirable since it does AC and DC both Reverse and regular polarity. I dont know if the Miller Does DC?