• Help Support Hardline Crawlers :

Recent content by sirlance

  1. S

    Ultimate Job

    Id like to hunt and 4-wheel the rest of my dayz, basically a deer farmer that wheels.
  2. S

    The Jew buggy

    Have you looked into the slip yoke eliminator kit? You'll have the shaft out anyway, I plan on doing mine all at once.
  3. S

    The Jew buggy

    The widening mod was first done by mike hagon. It accomplishes two things, moves your front tires forward 1" by re drilling the lower a-arm rear bolt farther out which pitches the wheels forward. Once completed it allows you to run the short (drivers side) axle on both sides. Only have to carry...
  4. S

    The Jew buggy

    Have a buddy that ran ran Sami axles on slick 33" tires and wheeled nothing like ya'll do at the parks, mainly trail rides. During that two years he had an axle related problem almost every time he took it out. Switched to Yota axles and went to 36" TSL SX all stock and hasn't had a problem in a...
  5. S

    The Jew buggy

    Your buggy is awesome. This is my wheeler. I'm open in the front on 31" TSL, Ive had to change that Aluminum Housing once, cracked right along the bottom. Since you have yours out it would be a good time to find a Vitara (Steel) front housing if you can find one. Ive been looking for two years.
  6. S

    What kind of power and tire size will zuk axles hold up to?

    Ive been thinking about Yota Axles, a tracker in my group did them on 36" TSL SX. Now he cant keep up on the trail, 35 MPH is about it but can crawl over boulders and up ledges that I cant. I wanna build something thats in between, prolly trailing arms in the rear but the front becomes the week...
  7. S

    What kind of power and tire size will zuk axles hold up to?

    Thanks fellas. Its an auto and it has 4.88 axle gears. My next upgrade is going to be 5.13 out of a 4-door, just change the whole 3rd member and move my spool over. Ive been looking for a steel front housing out of a xl7 or a 5-speed, V-6 Vitara for two years, seems like a unicorn. Been on...
  8. S

    What kind of power and tire size will zuk axles hold up to?

    I think this is my first post, lurk every single day. Trying to learn about crawling and wanting to build a true crawler whenever life will allow. This is my 97 Geo, 16 valve, 3-speed Auto 31" TSL, 2" body lift, mild trimming is all except a 3/4" puck in the front to get back what I lost from...
  9. S

    Sold/Expired toyota axles

    Where are they located?
  10. S

    Anyone ever built a Floating Boat Dock?

    Look up Doc Boxes Unlimited. They sell the float's and a bunch of other stuff for docks. Oh, hello from West Virginia BustedKnuckle. Always watch your and Madrams Vids.
  11. S

    Opinions wanted.... What's the best "cut" for a TSL -

    In the pirate thread above, which cut is which? The top Tenn. cut and bottom Aetna cut or the other way around?

Latest posts

Top