Doing a little work on the HEEP

Reworking the suspension , body and a little more power

[attachment deleted by admin]

cut 7" out of the center

[attachment deleted by admin]

Cut the frame to lower it and new 4 link
and fit the hood to the body

[attachment deleted by admin]

payne97 said:

cut 7" out of the center

Click to expand...

What's it measure inside now?

43" from door panel 2 door panel

Mounting 6.0 400 and 4to1 300
Plans 4 the 6.0 LS3 intake L92 heads and cam ?

[attachment deleted by admin]

Motor mounts

[attachment deleted by admin]

Linkn up the rear

[attachment deleted by admin]

Di you have any issues running the 2x2 square links before?

No and it was 2x3 3/16 wall Goin with chrome moly this time

nice job,are you goin to make a new roll cage or cut that one down? keep the updates comin

Make a new 1 with 2" and 1 3/4 it will b about the same

Man ur rig looks good. I hope with all the time that its takin me to do mine, it will look as good as all yall buggy guys. Lol. Do u got the front full four linked. Could u post some pics of it.

Ill have the motor back out soon ill take another pic then

[attachment deleted by admin]

Ok ya I get the idea bout the front now. Did u see my pic of my outside bar?

Hey payne one more question. I don't have to get my lower links like really close under the t case do I ? I think I got a good way to do it. I think I can get them bout 6 or 7 inches off the edge of the frame which will be right under the knuckle of the t case. I'm going make a new cross member. Out of flat 5/8". And brace it up real good. And run my lower links to it. Then run my upper links to the brackets that I had originally made for the lowers And I think I will look pretty close to urs. What ya think?

Yea it should work i think mine r 11" apart

back 2 work

:afro:

Hell ya looking good man. When's it gonna be done??????