Cut 44 boggers with built tons??

1tonyj · Sep 21, 2013

Wanted to see what you guys think and if anyone runs close to the same setup and how they like it or not..... I have never run boggers before...that being said my tires are worn out and I got a good deal on some like new 44 cut boggers. These things are nasty looking compared to the tires I have been running (44 TSLs...Aetan cut in rear and TN cut in front) and Im a lil concerned about my axles staying together lol.

My axles are Dynatrac Pro Rock 60 front with RCVs, Dynatrac Trail 60 rear with chromos, 5.13 gears and Detroits at both ends.

My Drive train is TBI 350, NV4500, Atlas 3.8

I live in Florida so I wheel diff kinds of terrain....but we do make several trips a year rockcrawling.

rdw0007 · Sep 21, 2013

i am running 44 cut boggers on a 14 bolt and gm king pin 60 in a bouncer with an ls th350 and lomax and only thing i have broke was a 30 spline stub shaft went up to yukon 35 spline no issues yet

you should be good with that set up and i love the way my cut boggers pull

peanut · Sep 22, 2013

Should be good got the same set up but without vec

CHASMAN9 · Sep 22, 2013

One thing about them boggers, you'll find out real quick where your weak link is. :****:

1tonyj · Sep 22, 2013

lol...i figure they prolly will

AllGoNoShow · Sep 22, 2013

I have non-cut 44'' boggers in a fairly heavy truggy, on heavy H1 double beadlocks that have 1/4 thick rock rings. RCV's/4.10's in a high pinion 60 for the front axle. Sterling stock 10.25 in the rear. I was breaking driveshaft joints before anything else. Now I have 1410's all the way around and have not broken anything since. You should be ok.

1tonyj · Sep 22, 2013

ok cool...i got 1410s all around also....thxs for the replys

Humpy · Sep 23, 2013

AllGoNoShow said:
I have non-cut 44'' boggers in a fairly heavy truggy, on heavy H1 double beadlocks that have 1/4 thick rock rings. RCV's/4.10's in a high pinion 60 for the front axle. Sterling stock 10.25 in the rear. I was breaking driveshaft joints before anything else. Now I have 1410's all the way around and have not broken anything since. You should be ok.

What joints were u runnin b4 1410 switch?

fordcontraption01 · Sep 23, 2013

Lol just noticed the guy ridding in the back in that pic :woot:

ridered3 · Sep 23, 2013

CHASMAN9 said:
One thing about them boggers, you'll find out real quick where your weak link is. :****:

Side hills???

1tonyj · Sep 23, 2013

Got um on today.....guess we will see how they do at GMP.

I know lateral traction sucks with boggers so I may cut them like the ones on TC's old buggy Hell Raiser.....i know you guys will call me a :tc