winch wiring

I up graded my winch siloinods to the up right ones and don't know where the wires huck on the siloinods. Any body klnow where they mount or have a picture they can show me of their wires. Its an warn winch.

Jay1 said:

I up graded my winch siloinods to the up right ones and don't know where the wires huck on the siloinods. Any body klnow where they mount or have a picture they can show me of their wires. Its an warn winch.

Click to expand...

Email Warn with your winch's serial #, they differ over time. You'll have to compare to the old setup and use some logic.

well the old silionods were the lay down style but they only have the up right style now and don't know where the wires huck on?

Jay1 said:

well the old silionods were the lay down style but they only have the up right style now and don't know where the wires huck on?

Click to expand...

A solenoid has 4 terminals, two small for the coil and two big for the switch. Neither have to be connected in any special direction. Not that hard to figure out if you have the old schematic to get you started.

Ya but if I can get a picutre of a newer winch silionods then I could huck it up. I have tryed different was but no luck.

Maybe this will help... This is a diagram of a Warn HS9500i

View attachment 7486

TeamJeep said:

Maybe this will help... This is a diagram of a Warn HS9500i

View attachment 7486

Click to expand...

Problem is, I think there's a buss bar missing in that pic. You don't need a current pic, what you need to do is duplicate the old circuit using the new components.

Here is a picture

old


New

Ok, your new arrangement is similar to my 9000. I'll try to get a pic tonight but it'll be late...

I don't see a common ground for the soleniod coils in your setup. Refer to the brown wire in the top diagram that TJ posted.

Don't even ask what cables go to what terminals on the winch and battery, you should be able to decipher that from that other diagram. :flipoff:

Thanks that will help out a lot. :hi: