• Help Support Hardline Crawlers :

Search results

  1. D

    SBC guru's....need some help.

    Cranking it over you can watch the valve that lines up with the intake port go open and then closed then make sure the piston is on top. Just make sure watch the right valve. when both valves are closed if its a hydraulic cam just turn the pushrods with your fingers while you tighten up the...
  2. D

    Cameron buggy build

    Whats the possibility of the next one being another rockwell buggie?
  3. D

    SBC guru's....need some help.

    How fast is it cranking over if its real fast like it has no load on it you've got the valves to tight.Take your valve cover back off of the drivers side and make sure you've got the timing set after the intake valve closes.If both of them are right sounds like the cam is not degreed right.
  4. D

    Cameron buggy build

    Who ended up buying this buggie?
  5. D

    WEROCK Dayton, TN (Under the Lights)

    We're going again we went last year and was amazed at what these comp buggies could do in the pouring down rain, flat impressive
  6. D

    Cameron buggy build

    John Galbreath can I get you to pick me some lottery numbers seems like you must be a psychic
  7. D

    Rockwell buggie build

    Leaving her wide I like them wide seems to make them more stable at the risk of knockin down a few trees in narrow trails
  8. D

    Rockwell buggie build

    Heres some updated pictures of a build I've got going on for a friend of mine.Specs are Front and rear steer rocks, king coilovers, psc steering 1 1/4 heims, 2 1'4 7075 lower links, 2" 6061 uppers,stazworks 20" wheels,corbeau reclining seats, 350 turbo with twinsticked 205, and he decided...
  9. D

    blown sbc?

    1.5" is way small the bigger ram will work better but are you sure you have the orbital lines ran right? should steer both ways even with a small ram i would think? :dunno:
  10. D

    1st weekend in April @ Hale mtn

    We went to WE Rock in dayton last summer and was amazed what the bfgs and maxxis did. They climbed like hell with it pouring down rain, they was climbing things that most rigs wouldnt do dry.I think if many people went and watched rigs like that go they would rethink whats being built and...
  11. D

    Sold/Expired Big Block Chevy shorty headers

    Surely someone needs these [attachment deleted by admin]
  12. D

    Sold/Expired 1993 cherokee

    Heres you a couple [attachment deleted by admin]
  13. D

    Sold/Expired 1993 cherokee

    I will try to get some up tomorrow, forgot my camera at my shop today.
  14. D

    Sold/Expired 1993 cherokee

    1993 jeep cherokee would make a good trail rig. It's still stock right now with only 120,000 miles on it, and runs great 4.0 liter, automatic, 4 door.Needs a lift and tires and there you go.Try to get some pics tomorrow. 1200.00 (615)428-3489 located in Dickson Tn.
  15. D

    Sold/Expired Big Block Chevy shorty headers

    I've got a set of brand spankin new coated shorty headers for a big block chevy that were never run, decided to go with a LT1 instead of 396 so don't need them anymore. 220.00 located in Dickson Tn. (615)428-3489
  16. D

    Ready to secede?

    There needs to be a whole different party started to get rid of all the jack offs in office now. Untill that happens nothing will change, the whole democrat and republican thing has lost their bearings and they just do whats in their best interest for re elections, and their pocket books.And why...
  17. D

    Another rockwell buggie build

    Yea I weld some 3" angle to the housing, and then flat stock to the truss.I do all my rear rock supspensions this way, seems to work good.Just had the chunk out of it cause i was tired of lifting the dang thing up.
  18. D

    Beer and loading up after a ride

    I was looking thru some pics from last october and ran across this one, forgot I had it.This was my old buggie we had just put it back together for a friend of mine and took it to a local park for his first trip in a buggie, he had another friend of his pull it for him to the park. When it got...
  19. D

    Another rockwell buggie build

    Couple of more pics, it's rolling around now got a few more bars to install and shocks are getting ordered monday. Ended up with 120" wheelbase with 27" under the frame.I was able to keep the 4 link bars where the lowers are the same length front and rear, and the uppers are also the same front...
  20. D

    Cameron buggy build

    I had a spy pic sent to me the other day of this, thinking about putting them on ebay to see what they would bring.

Latest posts

Top