Search results for query: *

Thanks everyone for all the replies. I am going to take it all under some thoughtful consideration and make a decision.

I agree, the problem I have is I don’t really know what’s fair pricing either way. I have almost 4-5k in just 5 wheels/tires and ORI’s best I recall.

So fellas, I have been a reading member on here for many years at this point, and through the many years I have learned a lot. I have also had the same project sitting on my lift making very little progress along the way. That leads me to needing your opinion. I have a lot of nice parts for...

Sent from my iPhone using Tapatalk

Coming right along Luke, I'm still hunting for some tires for ya, I'm not sure what the budget is for wheels and tires but someone on here threw up a set of TMI bead locks I believe. Sent from my iPhone using Tapatalk

I am underway on my 1 ton build and need to get these out of the shop. No issues prior to pulling them out of the 97 Cherokee. Located in Gtown KY. Price is OBO. Will trade for things I can use; tools, 1 ton swap parts, etc. Lemme know what you have. Sent from my iPhone using Tapatalk

I apologize Gottagofast, I missed where you asked me for a price for mine. $200.00 bucks if you want it. I am not sure what the current going rate is, but this one is out and ready to go. I may be able to bring it part way or all the way to louisville as I may need to go to pull a part here...

I have one out of a 97 Cherokee, located in Georgetown Ky, complete setup. Have a complete 29 spline 8.25 also if you know anyone who needs one. Shoot me a PM with a reasonable offer. Sent from my iPhone using Tapatalk

As the title says, I have a 1991 Cherokee for sale. I bought it with intentions of doing a two door build, but I have been unable to obtain a title for it, and I'm tired of trying. 197k it starts and runs, but doesn't like to take fuel, not sure if it's bad fuel or what. Has new plugs and wires...

Luke, you have a pm. Sorry for the minor hijack.

I put together a 4.5" RC LA lift for a buddy of mine on his XJ last year. The LA's have their latest bushing setup in them and so far so good. It has seen a few different wheeling trips and has performed very well for an out of the box setup. The ride difference between it and the two SA...

I have some 37x12.5x17s KM2's on Ion 138's 17x8x6.5. Haven't created a Classified add yet but I'm looking to get $250 for the set. Located in G-town KY.

Those are all some nice stands. I am sure it will take me a little while to even have time to put this thing together and get started on the stand so hopefully I can put together a good setup. Where are you all sourcing your parts for the air/hydro conversion? I know most people use a HF ram...

Pretty genius Idea. Will definitely consider this as an option. Thanks for all the ideas so far, and the picture. Keep em coming.

I would eventually like to not be using it manually, but that wasn't an option for now. Allegedly, the model 32 isn't too bad unless your bending some really heavy wall stuff.

I have to agree, but I have also seen some pretty cool stands which incorporated other things in with them also, i.e. tubing notcher mount also. The simple stand is most likely what will get built, but I am all for other cool stuff to go along with it.

So I just bit the bullet and purchased a JD2 model 32 manual bender. Now I know I can find lots of stuff on the web as far as stands, but I thought why not ask the folks here on Hardline. So, for those that wish to share, I would appreciate seeing your stands and or reading your opinions...

I used to frequent the Cummins forum a lot and there was a guy by the name of Justin Tuggle that built bumpers in his spare time form the Armed Forces. I believe he was located in NC. You may do a little digging and see what f you can find him on there. Also, check out the move bumpers...

I was referred here by a buddy to look for some 8 lug beadlocks. I quickly found the forum to be pretty awesome and try to read daily. The flip side is that I am just starting a build with a 1 ton swap so.... as slow as it is I don't have anything to post or contribute about my jeep on any...

I figured I would go ahead and introduce myself here on Hardline. Unfortunately I am just starting a build so I don't have any exciting pictures to show just yet. For what it's worth, I'll give you a short list of the on hand parts list and let you all figure out where this is going. 97...