Search results for query: *

When you say you have a Derale stacked plate cooler, is it a remote one with a fan (like the Derale Atomic) or something else? I had been cooling the 32RH trans in my TJ with a Derale Atomic that was mounted under the hood, but had an air inlet through a series of holes in the inner fender and...

Also have a Digital Infinity with cheater lens. Had it for 3+ yrs as a hobby welder, no issues. Like the big viewing window, only downside is that extra glass = extra weight, so it is a little heavier than one with a smaller window. I noticed it when I switched from a helmet with the "normal"...

I'm running 5 point Crow's with the padded shoulder straps (3" shoulder and lap, 2" crotch) with Corbeau Baja SS seats in my TJ. Very happy with them. My seats are on the Corbeau double latch brackets. For the crotch strap I took a piece of 2"×4"× 1/4" plate and welded a double shear tab to...

Thought I posted this last night, but somehow it didn't show up this AM when I looked in the thread. Not sure what you are trying to weed wack - whether it's heavy brush or just typical trimming around the yard, but I really like my M18 Fuel. It gets 30-45 minutes on a 9 A/hr battery and will...

You may want to consider the Goodyear Endurance trailer tires if this is for a typical 16-18' tandem axle car hauler. They are one of the few, if not only, made in USA light trailer tires. They have a higher load rating and higher pressure than comparae tires. I bought a set in 2017 for my...

The OP (and most everyone else) didn't mention whether the cooler they are adding is an auxiliary cooler or the only cooler they are running. The liquid/liquid cooler in typical factory radiators is a pretty efficient cooler, and if you swapped radiators and are not running the transmission...

Here's a couple pictures of mine installed. As mentioned, you can get the threads started in the bolt and there is enough room to get the line in the clamp portion from the top. You can loosely snug and then adjust spacing/angle, etc. There was enough room in the clamp to accommodate my -3An...

I just bought three of the AJK Offroad ones for my build. https://ajkoffroad.com/shop/brake-line-clamp/ Really nice pieces! I was going to fab something, but for $20 it wasn't worth my time to mess with it.

I just ask for their name and company name and when they ask why I tell them this number is on a national do not call list and want to make sure I have the right info to report them. They hang up every time and never call back. Another version is that I tell them the call is being recorded.

These are nice! Been looking for something like that for my front brake lines. Unfortunately it looks like they only go to 2" and I need 2.25" to fit my front links, so back to the original plan of designing my own.

Whatever you do, don't ever try a real pressure washer, otherwise there is really no further discussion necessary. I used to borrow my buddy's 2500-3000 psi big box store model to clean my dog kennels, horse trailers, house, etc. It works, but you are only cleaning a swath about 3-4" wide or...

I'm not a radio expert, but based on the limited channels and low watt (<5) rating I suspect these are more like the family radio stuff than a "real" UHF/VHF set-up and may not be a whole lot better than a CB. I have the Baofeng BF-F8 HP they show there and it seems to function well and have...

I've been thinking about a winch like this for mine as well, but I did see one thing on the Quadratec winch you linked that would not make me happy. The line speed is 8.6 fpm, which they claim is "fast". That's really super slow. A Warn Zeon or Ramsey 9500 is 33 fpm, and the Warm 9500 cti is...

Just to add some data to the thread, I purchased a set of the brand new Goodyear Endurance trailer tires (205-75-15, Load Range D) for my 16' car hauler and hauled a Jeep buggy from Tampa to Moab and back (~4200 miles). Tires were super smooth, no issues and no appreciable wear. Ran at 70-75+...

I have this same problem and looking to see some ideas. I tend to have a number of receipts/notes in my wallet for various things and there are quite a few plastic cards between various ID's, Sam's Club cards, credit cards, debit cards, health care HSA cards, etc, so putting a business card...

Mine showed up today - great artwork and nice quality shirts!

I'd definitely be in for shirt/hoody/hat's. If there's concern about the "limited" nature of the previous stuff, you could just change the design slightly or add some additional graphics/words to separate the "limited edition" stuff that was given out earlier from the standard run-of-the-mill...

Well of course, you need 3 to race and one as a sacrificial pre-runner :)

I have a couple of new 4' two bulb T8's along with four of the Sams 4' LED's in my shop. Overall, I am very happy with the LEDs, especially for the price. I did an experiment comparing the two T8s withe two LEDS and a light meter app on my phone. The LEDs had slightly higher brightness values...