Search results for query: *

Re: Richie Cheatham's Hoorah buggy RAFFLE / or for sale It's not a raffle, they bought mason jars. JS Sent from my SAMSUNG-SM-N920A using Tapatalk

Re: Re: Axle Tech Portal Axles - SOLD Burb I think got scraped unfortunately Sent from my SAMSUNG-SM-N920A using Tapatalk

Putting these Axle Tech Portal Axles up for sale. Front axle is HP king pin 60, 4.56 gears, ARB locker, Reid C's. Re tubed for 69" wms. Comes complete with everything from Axle tech (brakes, rotors, calipers, axle shafts) 4340 Yukon blanks. Rear 14 bolt Axle Tech portals, tubes been cut...

Re: BFG and Maxxis Stickies Quote on 5-42 treps to 46732 business Sent from my SAMSUNG-SM-N920A using Tapatalk

2- Yukon aluminum 9" 3rd's with load bolt 1350 yokes 2- 31 spline Yukon zip 2- sets of 3.70 gears and install kits If you get trail gear, 2- 3.5 housings 1 pass drop Warn 9.0rc winch or 9.5cti-s Atlas 3.0 27 spline input, 1350 yokes 32 spline outputs, vss, pass drop 2- PSC 3" x 9" rams 1- Howe...

Re: 2016 EOR Ultra4/buggy Will sell minus motor and trans for $30k. Pick a set of tires

Re: 2016 EOR Ultra4/buggy :stir: :drinkers:

Re: 2016 EOR Ultra4/buggy New trailing arms are in and a fine tune with Phil this weekend on the shocks. Buggy is running awesome! Sent from my SAMSUNG-SM-N920A using Tapatalk

34 hours, 200 miles. Driven by the wife mostly around the property. Have 5 year transferable warranty. All stock. Also have a Wide Open Design cage still on the pallet with bumpers that could be had for another $1200. RZR $17,500. Located in Boyne City, MI. 231-675-3930 Sent from my...

I ran the trailreadys with the pvc inserts in the doozy buggy with real good luck. I know Steve Morgan runs them as well with good luck. Big investment though

Re: 2016 EOR Ultra4/buggy Trailing arms are being built this week. 7075 billet with 3/8" stainless braces where the shocks bolt together. No more trailing arm issues. Post updated to bottom $ price. Sent from my SAMSUNG-SM-N920A using Tapatalk

Re: 2016 EOR Ultra4/buggy Thanks guys! Have a few people interested but nothing solid. Everyone wants to know bottom dollar, it's $65k.

Going to sell the buggy, need to step back and focus on home life. Several trade offers and people asking what bottom $ is. Price dropped to bottom $ and not willing to deliver. I've put over $50k into this buggy this year. My opinion it's the best running handling buggy out there for the...

Pedal feels about right, not smooshy but not hard either. I've thought about going to a 7/8" master tonget more volume and stay with the 1/4 lines. Instead of throwing parts at it, I know someone knows what the right setup is. I had hydroboost before and man do I ever miss them. If I had...

Ok so the buggys brakes aren't the best by any means, now with this new power plant it's boarder line sketchy! It's never been able to hold it's self on a hill. I know 1 of the issues is the stainless braided lines from the masters all the way to the calipers. So my questions are. I have 3/4"...

26' garage? What's the width between the cabinets and the door in the back? Ramp door width? Would also like to see interior pictures Edit: see it's 90x90"

Been a rough couple weeks of racing for sure. The race at Hawk pride was my own fault and all I had to do is hold the steering wheel strait and was coasting to a first place. Like Croes said i didn't lock in the steering wheel all the way and paid for it. Damage report on that was broken...

LS motors are super hard to beat for sure! We are finding out these new genV motors are on another level as far as computer and being able to tune them. Like croes said they are pulling huge gains on just tuning on the dyno with these. Adding an intake and gaining up to 60hp over stock.

We are plugging into the OBDII port to get most of what we want data wise We are using separate cables to pull temps from the trans and also the oil temp. This engine comes with a heat exchanger for the oil cooler and we are planning on using it since one day we could be running the king of...

So from exhaust croes took the buggy over to Parker browns for some wiring love. We had a game plan setup and everyone was on board. Owner Owen got started doing his thing on the wiring and Chris did his on the cnc plasma table. This is where we are at now so I'll keep updated as they come...