Search results for query: *

Air shocks/struts are not what you want you already have springs to support the rig.

X2 on Jantz he has quick turnaround:awesomework: Also try Branik motorsports... Stan has always done great work for me

If it is too twitchy at speed (rpm related) use a bigger pully.... Been doin this for U4 go fast

I limited my 10" down 1.5 each side with no changes in steering at speed, what It did do is increase power of the ram to return from full lock under load.

I'm running FOA 4" bumps w/80psi and they work great. Price is good and they come with mounting cans & hardware, and 3 grooves w/snapring to ensure no movement of the body in the cans. When welding cans use some tight fitting tube inside to act as a heat sink to prevent warpage.:beer:

I have a 22re rebuilt to LC eng specs, .030 bore, Keith Black pistons,block was align bored,balanced, and blueprinted. Head has,port match,polish oversized valves,dual high rev springs, nwor torque cam. all toy gaskets and seals 8k since rebuild. come hear it run.... I will pull it off the...

Congrats on the little boy!!! Name?

OH YEA!!!!! get longer studs.

You are in the cool kid club now buddy!:redneck: Looks great!

I just use a skinny long candle and pound it into the hole works like a charm!

Candle wax works great! used like the grease method with a punch and electrical tape just not as messy. Been doin it this way for years.....:corn:

FOA has a spring rate calculator and how to use on the homepage....with explainations of all you need!

Yes! 3 3/8" radius ctc:redneck:

It is 6 3/4" diameter across my clocking ring, so 3 3/8" radius.:awesomework:

Get the proper lift springs, Blocks suck!

ARP studs and locktight......with toy hubs....good to go!

what rig?

call Brian at Driveline Tech... he builds some strong ****. James blew the rear atlas output yoke at the splines when we were at werock with no damage to the shaft:awesomework:

Will this work with the 23 spline turbo t case?

Go the AA site and download the instructions....the bellhousing needs to be bolted up and pushrod adjusted to spec before bolting up trans:awesomework: