Search results for query: *

70 gears into a 61 Thats "Carl Jantz" and yes my kits fit D70 gears into 60 or 61s. And for the 61 if you use the thick 70 gear sets with a 4.56 & up Dana 70 carrier you won't even need the spacer.

coupler Dang well I guess that put me out of work:booo:

local parts store numbers Most parts store guys don't know where to look in there books so here is a chart of what I made that's locally available. they are usually cheaper than having custom ones made but the selection doesn't always meet our needs. DIAMETER I.D. LENGTH NAPA...

Fitting after market housing I've looked at several pics of the rock jock and see no reason why it couldn't be done. There seams to be about 1/4" clearance all the way round the ring gear, and all I need is 3/8". I'm sure it will take a bit more grinding but on the other hand their housings are...

Clearancing Here is a shot of just how little you have to take out of the housing to get the gears to fit.

gears for hp 70 We chased the BOM numbers looking for part numbers on the HP 70 gears, yes you can get 5.13s but the 4.88s are actually Super 60 gears unless you have other info. I've even seen super 60s in a high pinion70.

set brgs Yes you would use your Dana 60 set up bearings. and you can reuse your Dana 60 pinion tail bearings. Then for carriers you can use either a high speed or a low speed D70 carrier. the way the offsets are between the 60 and the 70 it turns out that a low speed carrier is two close for...

kit contents All of the above is true to get the job done, here is the standard Jana76 kit

diff My diffs are D60 low pinion front and rear with D70 5.86s. I have a hp 60 right now that I'm setting up with 70 hp 5.13s

J76 with ARB I cracked several 7.17s and 5.86s in the d60 before coming up with this. so You got some cracked 6.17s this should fix it for ya.

Jana 54 cutaway view This shows the offset bearings and install of the D50 pinion in the 44 HP housing.

cost A standard kit runs about 225 and a deluxe kit runs about 300. With a deluxe kit you start with a bare housing, a standard kit assumes you have some good 44 bearings and parts to start from. I can tailor a kit to your starting point. After I get the J87 details worked out I'm going to...

pics Here is the 70 gear in the D60 housing on a D70 Power lock

Jana 76 I just sent money to up my subscription for post-ability. Mean while I'll try saving it very small and posting.

carriers For 76 you need a D70 carrier or a modified D60 carrier. For the J54 you use a High speed, (3.73 and lower numerically) 44 case. Bear with with me I'm tiring to up load pics now.

After breaking numerous D60 Ring and pinions I have come up with a solution. By using offset bearings, some grinding and the right parts you can install Dana 70 gears into a 60 housing. The design is such that no machine work is required, just the kit and some grinding. I've also built kits to...