Search results for query: *

possibly parting this out. contact me if your interested in parts off of this thing

sell me your old motor?

worked hard this weekend and finalized the front suspension on Saturday. worked so late that i got a little cross eyed. Sunday i tried to start on the window bars Sunday and had an epic fail. realized that i my shock hoops were off so i will have to cut apart the driver side hoop and fix it and...

what do you run on that boat of yours :fawkdancesmiley:

well here is a quick update. This last summer has been super busy. I have got married and i was competing all over the country for wakesurfing. I did well though. took a third, two seconds and finished the season at Worlds(the biggest event in wakesurfing) with a first place finish. Just for fun...

got the front links finalized today. once i get the front of the chassis done i will be able to build th panard bar and finish it up. too tired for a bunch of comentary so just pics tonights.

well had a chance to work on it again today. got the crossmember for the transmission/ transfercase build and the front of the frame cut off. Just a ruff cut for now until i get the front axle back under it and the link design figured out and here is one of how it sits now. cant wait to get...

dont raise the motor move it back and lower it 1". you dont want weight to get higher. I am pushing mine back almost 15" and lowering it about 1"

i got a tank and regulator up in lynwood if you need to meet up. on my 2.0 shocks i run 165lbs on the back of my truggy. it all depends on how much oil you have and how much shaft you want exposed.

i say get them and give it a shot.you are definatly rolling the dice. take them to bobby to get treated for sure just for good measure

So quick update, I got stuck working on this thing all by myself today. Its kind of nice honestly, cant wait to have a shop of my own. I finished cleaning up what little frame i am going to keep, cleaned up all of the tubing and got the motor placed. Its just sitting on jack stands but is ready...

i was running and still will be running 16 fox air shocks in the rear. LSO sold me a set of 14" swayaway air shocks for the front

Well as you can see i decided to hell with the cab, let just make this as close to a buggy as i can. Plant to keep just a few feet of frame, mostly because i dont want to ditch the back half. I figured it was going to be more work than it was worth to move the motor back as far as i wanted and...

figured it out. that oil port is on the return side so i just have to get the adaptor that goes in between the oil filter and the block

mostly becuase i got it for free so why not right. There are other reasons but mostly because it is free. Even if it costs me $40 to get the parts i need to plumb it up its worth it to me. Overall the system is super simple and very effective. Now i would never spend the 400 that they are new...

i will post the requied shitty cell phone pick of a block that i have at the house of the said oil port on exhaust side of the door. After putting some thought into it though i am thinking i should just get the sandwich adaptor from LC and not run a line full of flamable fluids right next to my...

accusump on a 20/22r hybrid question So here is the question, I was given an accusump system by a friend of the family. It was kind of an afterthought and the motor is pretty much assembled. This means that drilling and tapping the block is out of the question. Motor is a 20/22r hybrid motor...

every time i pull this thing into the shop i only mean to do a little bit of work. well it has grown again. With LSO getting that buggy i ended up buying some of his parts off of him. So adding to the list Linking the front Full hydro with double ended PSC ram Cut off that god awful tube work...

So I lost my buddy camera FML. Got to get him a new one/ hope I find his. Then I can get some decent pics. Here are a few that I have on my phone. Got the motor pretty much wrapped up. Just have to get oil pump installed and swap over a few parts from my old motor. Final specs ended up being...

Dude quit playing with it and get a new blade! Besides you should be welding on my housing. Chop chop mo fer :p