Search results for query: *

Mine are in about the same shape. the fronts look good & solid but the rears are gone on both sides. I'm letting my body man pick what it needs once he gets into it. I know he'll have to fab up a dogleg on driver side too.

I'll be keeping an eye on this one. My Excursion is getting some upgrades right now @ the body shop. LineX roof, new rockers & an 07 frontend.

I have this mounted on my buggy. Still working on wiring so I haven't had a chance to use it. Comes with AN-8 inlet, AN-6 outlet

It looks great. Keep on posting pics. Im building the same chassis (without near the skill you have) and need the inspiration! :dblthumb:

Go ahead & snap another pic of it finished up so I can steal your wiring! This thread is helping me out. I'm almost ready to start wiring mine. Just gotta finish the dash layout.

Chuck up on the original tailshaft extension housing. cut it down to 2.5" then bore for the seal 2.750 x 0.505 deep (national seal 3946 - same a stock) Start with a Neapco N3-23-9163X slip flange yoke. I didnt realize till now that a 32 spline slip is cut different than a 32 spline fixed shaft...

I did a hack & tap SYE to mine for a 1410 flange mount. It cost me $90 for the 32 spline flange & then a little machine time Sent from my Pixel using Tapatalk

Re: BAttery mounting. Motobilt has the best I've found price wise. Less than $40 Sent from my Pixel using Tapatalk

Re: Re: 5.3 or 6.0 This is what I'm doing.

I have the Summit Syclone fan on my 4.0 and no problem keeping it cool. I made a shroud out of a price of thin AL tread plate I had laying around. It mounts flat to the back of the grill using the same bolts as the radiator with the fan in front pushing. I had to take the Syclone name plate off...

Re: Stock Waggy main leafs with a cut down XJ rear main leaf added for a single ended military wrap 2nd leaf. Shackles like shown above & beat the hell out of it

Re: Standard 3500# car hauler axles are 95" WMS. Decks are 82-84" wide. If you want to go wider on the deck you might could gain a little room by running shallow offset wheels but then your looking @ not being able to borrow your buddies spare when you have a blow out.

Re: I have the same single pass cooler. It is mounted vertical on my fan shroud. Never had any problems.

Re: 3/16 AR400 is what I plan on running. We machine & weld thick AR plate all day long making excavator buckets @ work. Its badass stuff

These are all on my passenger side rear 14" travel shocks (about 7 up/ 7 down when sitting on flat ground) Mounted right in front of the axle Just enough room to clear the frame

Re: I'm running the same spring setup with hp60 up front & 14 bolt rear & 39.5 TSLs. Procomp white shocks with 14" travel fit just right outside the frame & have worked for me for years. I can get pics this afternoon if you want an idea of clearance.

Re: Re: Re: redneck ram clevis help X2, this Set it up with the knuckle at full lock & the ram fully extended. Then turn to other lock compressing the ram & measure the gap where the shaft is still showing. You need a spacer to fill that gap. I used a piece of AL tube but I've seen people stack...

Re: With a name like T-rex, I was expecting a short arm lift on the front.

Re: Those pics were on an old account I had. I'll look this evening & see if I still have the originals on an old hard drive.