Feel free to give me a call or msg me on FB. I'm aiming for sets to be 2k or under with brake mount and highsteer arms included. Currently trying to track down blank material for the UB cups.
05+ 60 donor axle, you can reuse the stock shafts with a mark Williams spool,brakes And UBs or jump up to a 40 spline 1550 setup from rhodes diff or ecgs.with the 05+ Cs you have room for upgrade without sacrificing ujoint strength.
I have and I will definitely use them at some point.Was looking at using everything from the 60 I could. If I could sell a Gearworks 10HP center with 35 spline axle for 4500 to 5k I think they would sell.Plus with the new 40 spline 1550 being cheaper to get now the upgrades are endless...
Want to start a business building fabricated 9ins.Trying to buy in big with 40 05+ super duty axles to cut up and build fronts or sell regeared and stripped.I doubt it sells.Noboby will pay 10k plus for a beat up xj
Climbed one of the big hills ar the park this weekend.Nice to finally climb it.But broke something in the jk tcase. Front will pull in 4high but not 4low
I have a 2in drop xj arm from Rubicon express.But it limits my Steering angle with the full width axle. IT will be coming off this weekend for a 99 to 04 WJ arm. Longer center to center so I can get the most angle possible.some say it's a direct swap some say you have to file out the a few...
It's a 3 core aluminum amazon special with dual 10in fans.Same company but an older version with dual fans.
https://www.amazon.com/dp/B082GPB77B/?tag=hardlinecrawlers-20
Only issues is the air bubble funnel I have dosent seal well on the cap.Jeep stays about 200* when everything on the system is...
This pass weekend took the jeep to Midwest Jeepthing's Jeepstock at SMORR with my friends.Had a good time wheeled for a bit.Then found out 1/2x20 studs are not strong enough.Had the wife run me down some replacement after shearing 7 studs total on the front. Plan on tearing apart the UBs and...