Search results for query: *

Picked up some used Racelines. They are about an inch wider than the previous wheels but every inch counts. Bought a used Atlas 2 (3.8 gears) for a heck of a deal. I have swapped the 23 spline input over to a 27 spine, bought TJ-specific twin stick shifters, and a Dakota digital speedo pulse...

I think around 6 to 6.5".

Damn, I need to proofread before I post. Maybe someone can get a good laugh out of it.

Side shot.

Last year I made a few trips to places like Coppingers Cove, Windrock, Royal Blue, and Good Evening Ranch. Started killing locks outs so I switched to drive flanges. The steering box got too much play in it and I picked up a new Durango box and drilled and tapped it. Decided to move the trans...

It's pretty nice and it seems to help keep the heat from the transmission and exhaust out of the cab.

Spent a week in Harlan leaf looking and doing some crawlin. Bent and broke a few things. It has taken me about three weekends to repaired and upgrade everything. Killed the antirock, front driveshaft broke and bent the transmission range selector shaft, rear main seal started leaking.I put in an...

I did a transmission segment swap from an 02 4x4 van and everything is working. Need to take some time to fix the ac and get the jeep aligned.

It's a no-go on using the 03 file segments, they are different and you can't import them even if you wanted to.

I did a transmission/dtc segment swap from a 02 Silverado 4x4 and didn't have any luck. I will try the 03 Yukon file and do a transmission/dtc segment swap and see what happens.

Vss signal to the PCM is good. 2hi and 4hi shift perfectly. 37 inch is the actual measured height of the 42's with 5 psi in them.

With the transmission seg swap

Without seg swap.

I have been having issues with the PCM reading a ground signal when I shift into 4wl so that it will use the 4wl shift tables. I have an 2002 0411 PCM and a ground wire running to the c2 red 16 pin on the pcm and still not have any success. My VSS is at the rear of the transfer case. My stock...

Yes sir! I put 45 miles on it Saturday driving it around town.

Added some inner fender liners. Made a y-pipe for the 5.3. Modded a Motobilt battery mount to fit the space I have. Popped a couple of tendons and had to take some time off. Got side-tracked laying flooring all through my house. Pull the 06 aluminum block and head setup out and dropped in a 02...

Do these get shipped as a kit that you weld together at home? https://goatbuilt.com/product/ibex-2-seat-chassis/

What is the solution if it's back firing/knocking?

I got to fire it up for the 1st time today, still lots to do.

Pic of how the outside looks, ignore the old I6 under the fender.