Sold/Expired 1 and 1/2 big block chevys cheap

[zukimaster]

I have a 468 (.60) over and a 477 (.100) over k blocks for sale, the 477 came in a nice 69 camaro race car that my boss mans son bought a couple years ago, it ran 5.90 on alky and 6.10-6.15 on gas, it dropped a valve, so he bought the 468 while the 477 was gettin fixed, it ran bout the same, so this spring he took the 468 out to get freshed up and put the new 477 in, 2nd pass it had low oil pressure, it turned a main bearing i think, he got pissed and ordered a new 496, i opened my mouth 1 day and made him a offer on the 2 motors just sitting there and he took it! I no longer have a use for this stuff since i got out of drag racing, but i could take 2800 for both engines! or trade for something cool, the short block has JE pistons, roller cam, moroso oil pan, eagle rods, the complete engine has scat rods, roller cam, moroso oil pan, ported heads with all the good stuff, etc,etc,ect, this stuff pennys on the dollar! i will anwser any questions you have, im in Ft. Payne AL. my # is 1-256-996-2862, thanks Chad

 

[zukimaster]

 

[ETO]

So the short block is a fresh 468 bottom end and the long block is the 477 with the 2 passes that dropped oil pressure?

 

[zukimaster]

No, the short block is not fresh, had been running it then took it out to put in the 477, which is the one with 2 passes, both engines has stock cranks, the complete engine just need a good crankshaft because the rest of it is new, but more than likely will need to be align bored and new bearings