Sold/Expired 1 Ton V8 2 Seater $15,000

cheroking · Jul 26, 2011

Motor - 99 Chevy 6.0 V8 Stock with Jims Performance Tune
Trannny - TH400 - TCI RMVB with engine braking - Art Carr shifter
T-case - 203/205 NWF doubler - Dual Shifters on the 205
Front - CUCV 60 35 spline inner and outers Slugs - Detriot 4.56 gears - Custom 2 piece driveshaft with 1350 at pillow block 1310 at tcase and axle
Rear - CUCV 14 bolt - Detriot 4.56 gears - 1350 Driveshaft ujoints
Tires and Wheels - 42" Rockers(2 rides on them) on 15" DIY beadlocks (KORE)
Steering - Full Hydro with dual ended ram - High Steer Arms
Suspension - 1" or 1.25" Hiems cannot remember Four Link - 2" Sway aways at all 4 corners
Interior - Corbeu Baja Seats - Aluminum Dash with Oil pressure, Temp, Volts, and Tranny Temp

Odds and Ends - Optima Red Top, Wrangler Bikini Top, Cooler and Storage rack, Custom Fuel Cell to fit under rack, Custom Hood, Amp and Ipod Hook-up, Ammo box storage in cab, M8000 winch, Tranny and Steering Coolers with Fan, Dual Core Aluminum Rear mount radiator with Dual Electric Fans, 12 volt guy switches (winch control) and some extra parts

*Edit* NO TRADES/NOT PARTING OUT

Ben 2059076880 Located McCalla AL

Most pics are with 39 inch Iroks

http://youtu.be/EXAGW49A9jg

http://youtu.be/jvwKsn5tblU

bluzuk80 · Jul 26, 2011

Here you go Adam Lee

BUG-E J · Jul 26, 2011

bluzuk80 said:
Here you go Adam Lee

Not nice enough or tough enough for him!

irokcrawl · Aug 2, 2011

This was my old buggy, the Hiems are all 1 1/4x1" FK's, it has Bushings on the lower axle side links. The Links are all 2x.375 with clearance bends on the lowers. The Airshocks are 16" 2.0 SAW's. It has a Wilwood single pedal with dual Wilwood master cylinder for the brakes. Yukon 35 spline outer shafts. The buggy had about 25K in parts when i built it and I know Ben has put a good bit of money and time into it after he bought it from me. If I didnt already have another rig I would buy it back. The rig is very stable and will sling some nasty donuts :dblthumb: