JFab
Well-Known Member
Ok, it started as a 1998 Cherokee sport...
Note: This is a BEATER and has NO ***LE! Was a theft recovery and was wrecked in the front, i took a few and build a rought radiator support from stuff i had lyin around...
HAS:
-2000 or newer 4.0L coil pack motor in great shape runs great...can be heard runnin and driving
-Motor has Rusty's cold air intake and throttle body spacer
-AWD 4speed automatic trans...pulls and shifts just fine
-NP231 transfer case shifts out just fine and no SYE
-Front is a 99 cherokeee d30 housing that has been gusseted...3.55 gears;welded
-Rear is the stock 8.25 with 3.55 gears; welded
-Front has coil spacers and some type of lift spring around a 3.5
-Rear has rough country 4.5in lift springs
-2in machined aluminium wheel spacers
-35x13.5x15 BFG krawlers
-15x8 steel wheels
-New radiator and electric fan
-Beefed up front upper control arms and track bar
Ok, this thing looks like poo, but its ridiculous how well it goes on the krawlers, and the motor runs great! I got it to play around in before i start my buggy...
-also have misc. parts like shafts and drive shafts
-have three of the doors and the back hatch
-Jeep had power windows and door locks
-from what i can tell, the heater works just fine
-has 40psi of oil pressure at running temp.
-does not overheat at all, never goes over 210deg
-$1000 obo.
-rather not part out unless motor/trans/case sell
Contact James:
-email: [email protected]
-cell: 256-652-3029
Ok, i think thats all, if i think of more i'll post up...
here's a few pics.
more pics upon request!
Thanks!
Note: This is a BEATER and has NO ***LE! Was a theft recovery and was wrecked in the front, i took a few and build a rought radiator support from stuff i had lyin around...
HAS:
-2000 or newer 4.0L coil pack motor in great shape runs great...can be heard runnin and driving
-Motor has Rusty's cold air intake and throttle body spacer
-AWD 4speed automatic trans...pulls and shifts just fine
-NP231 transfer case shifts out just fine and no SYE
-Front is a 99 cherokeee d30 housing that has been gusseted...3.55 gears;welded
-Rear is the stock 8.25 with 3.55 gears; welded
-Front has coil spacers and some type of lift spring around a 3.5
-Rear has rough country 4.5in lift springs
-2in machined aluminium wheel spacers
-35x13.5x15 BFG krawlers
-15x8 steel wheels
-New radiator and electric fan
-Beefed up front upper control arms and track bar
Ok, this thing looks like poo, but its ridiculous how well it goes on the krawlers, and the motor runs great! I got it to play around in before i start my buggy...
-also have misc. parts like shafts and drive shafts
-have three of the doors and the back hatch
-Jeep had power windows and door locks
-from what i can tell, the heater works just fine
-has 40psi of oil pressure at running temp.
-does not overheat at all, never goes over 210deg
-$1000 obo.
-rather not part out unless motor/trans/case sell
Contact James:
-email: [email protected]
-cell: 256-652-3029
Ok, i think thats all, if i think of more i'll post up...
here's a few pics.
more pics upon request!
Thanks!
