RHINO660
TUSCALOOSA AL. ROLL TIDE !!!!!!!
2008 KAWASAKI TEREX LE
CUSTOM CAGE, WINSHIELD AND TOP
4000LB WARN WINCH - NOT WARN KNOCKOFF
DALTON CLUTCH KIT
DYNATEC CDI
14" ITP WHEELS 27" SWAMPLITE TIRES
HUNTERWORKS CARB KIT WITH EXTRA JETS
PRP FRONT SEATS
SINGLE SEAT IN REAR
FACTORY CAGE AND SEATS ALSO
4 - 6.5" SPEAKERS WITH AMPLIFIER - USE WITH IPOD
FULL SKIDPLATES FRONT AND REAR A-ARMS, BELLY PAN
BILLET EXHAUST TIP
I bought this Terex new a few years ago and have not had the chance to ride it as much as anticipated. As soon as I got it, I started looking around for cages to allow me to carry my 3 year old daughter in the back safely. I found a couple that looked good but none exactly like we wanted. I built this cage based on a design online that we liked but I lowered the roof a little more for a better look and lower center of gravity. I used a stock front seat for a rear seat and made a nice bracket to bolt it into the bed. A car seat straps to the bracket nicely and still has plenty of head room for a child. An adult has ridden back there before but it works better for kids. The front seats are PRP seats with lowered mounting brackets that lower the mounting position around 2". The stereo is to be used with an iPod or anything with an 1/8" jack. The windshield (not shown) is MarGaurd and is a lot better than just planin lexax or plexiglas. I am very picky about my stuff and this is NOT JUNK!
When I put the 27" tires on it, I also put a dalton clutch kit in and it seems to do great! I still have all the different weights and parts that came with the clutch kit if you want to change it up later or get a different combination. I also used a hunterworks carb jet kit that comes with some slides that go in the stock airbox cover.
I am going to include the factory cage if anyone wants it. The bed has been bolted where it will not open since the cage is tied to it but I will include everything to make it dump again. Nothing has been cut or modfied where it cannot be put back.
I will help any way I can with shipping but I am going to make it the buyers responsibility. I will carry it to a shipping point if necessary within a reasonable distance for no charge
$7500 CALL 205-393-0338 OR EMAIL AT [email protected]
[attachment deleted by admin]
CUSTOM CAGE, WINSHIELD AND TOP
4000LB WARN WINCH - NOT WARN KNOCKOFF
DALTON CLUTCH KIT
DYNATEC CDI
14" ITP WHEELS 27" SWAMPLITE TIRES
HUNTERWORKS CARB KIT WITH EXTRA JETS
PRP FRONT SEATS
SINGLE SEAT IN REAR
FACTORY CAGE AND SEATS ALSO
4 - 6.5" SPEAKERS WITH AMPLIFIER - USE WITH IPOD
FULL SKIDPLATES FRONT AND REAR A-ARMS, BELLY PAN
BILLET EXHAUST TIP
I bought this Terex new a few years ago and have not had the chance to ride it as much as anticipated. As soon as I got it, I started looking around for cages to allow me to carry my 3 year old daughter in the back safely. I found a couple that looked good but none exactly like we wanted. I built this cage based on a design online that we liked but I lowered the roof a little more for a better look and lower center of gravity. I used a stock front seat for a rear seat and made a nice bracket to bolt it into the bed. A car seat straps to the bracket nicely and still has plenty of head room for a child. An adult has ridden back there before but it works better for kids. The front seats are PRP seats with lowered mounting brackets that lower the mounting position around 2". The stereo is to be used with an iPod or anything with an 1/8" jack. The windshield (not shown) is MarGaurd and is a lot better than just planin lexax or plexiglas. I am very picky about my stuff and this is NOT JUNK!
When I put the 27" tires on it, I also put a dalton clutch kit in and it seems to do great! I still have all the different weights and parts that came with the clutch kit if you want to change it up later or get a different combination. I also used a hunterworks carb jet kit that comes with some slides that go in the stock airbox cover.
I am going to include the factory cage if anyone wants it. The bed has been bolted where it will not open since the cage is tied to it but I will include everything to make it dump again. Nothing has been cut or modfied where it cannot be put back.
I will help any way I can with shipping but I am going to make it the buyers responsibility. I will carry it to a shipping point if necessary within a reasonable distance for no charge
$7500 CALL 205-393-0338 OR EMAIL AT [email protected]
[attachment deleted by admin]
![IMG_2007[1].JPG](https://cdn.hardlinecrawlers.com/xfmg/thumbnail/3/3275-9c591c26c9843ed9471541fce3bfce67.jpg?1625928349)
