scottiebobbie
Active Member
- Joined
- Jan 28, 2009
- Messages
- 41
97 TJ w/ clean ***le
-98 4.3 vortec w fuel injection specialist stand alone harness and pcm work
-NV3515 5 speed from 98 s10 truck
-3.8 atlas II w/ 1350 yokes (I just had to upgrade the front output to 32 spline)
- dynatrac pro rock front axle 4.88’s, ARB, Yukon and dynatrac chromolys, 35 spline stubs, sexy trucker lady drive flanges
-Dynatrac pro rock rear semi float 35 spline, 4.88’s, ARB, ford exploer disc,
-39†BFG red label crawlers like new had 5 rides on them
-17x9 MRT 40 bolt x-treame duty beadlocks
-AGR hydro assist ram and box - the pump/ pulley/ and reservoir are PSC
-1350 d-shafts (front is ¼ wall dom)
-front suspension is a 3 link w/ a panhard and 2.5 fox air shox. I just installed 1.25 heims and 7075 2†aluminum arms
-rear suspension is a double tri-angulated 4 link w/ summit machine flex joints (just rebuilt) and 2.0 fox air shox
-full custom cage w corbea seats and RJS harness
-aluminum flat dash w/ auto meters, pelican ipod box and jenson marine radio
-PSC comp corners, custom sliders, custom tube fenders
-15 gallon plastic fuel cell
-bestop plastic rack
-IPF head lights
-Warn HS95i w/ 3/8 rope
-flex-a-lite heater
I just repainted the jeep and went through it. The cage will fit a factory style top w/ door surrounds but it will come w/ full soft doors, bikini top, windjammer , and tonneau cover. The only reason I am selling is to build a buggy.
Jeep does have dents and scratches and was USED but is solid. Last month I broke the front 27 spline front output on the atlas and that was the only thing I ever worried about and now that has been upgraded.
22k this jeep has a lot of custom work and time.
located in gainesville, ga
-98 4.3 vortec w fuel injection specialist stand alone harness and pcm work
-NV3515 5 speed from 98 s10 truck
-3.8 atlas II w/ 1350 yokes (I just had to upgrade the front output to 32 spline)
- dynatrac pro rock front axle 4.88’s, ARB, Yukon and dynatrac chromolys, 35 spline stubs, sexy trucker lady drive flanges
-Dynatrac pro rock rear semi float 35 spline, 4.88’s, ARB, ford exploer disc,
-39†BFG red label crawlers like new had 5 rides on them
-17x9 MRT 40 bolt x-treame duty beadlocks
-AGR hydro assist ram and box - the pump/ pulley/ and reservoir are PSC
-1350 d-shafts (front is ¼ wall dom)
-front suspension is a 3 link w/ a panhard and 2.5 fox air shox. I just installed 1.25 heims and 7075 2†aluminum arms
-rear suspension is a double tri-angulated 4 link w/ summit machine flex joints (just rebuilt) and 2.0 fox air shox
-full custom cage w corbea seats and RJS harness
-aluminum flat dash w/ auto meters, pelican ipod box and jenson marine radio
-PSC comp corners, custom sliders, custom tube fenders
-15 gallon plastic fuel cell
-bestop plastic rack
-IPF head lights
-Warn HS95i w/ 3/8 rope
-flex-a-lite heater
I just repainted the jeep and went through it. The cage will fit a factory style top w/ door surrounds but it will come w/ full soft doors, bikini top, windjammer , and tonneau cover. The only reason I am selling is to build a buggy.
Jeep does have dents and scratches and was USED but is solid. Last month I broke the front 27 spline front output on the atlas and that was the only thing I ever worried about and now that has been upgraded.
22k this jeep has a lot of custom work and time.
located in gainesville, ga
