tommy450r
Well-Known Member
I've got a pretty much new atlas 3.0 t case with all upgraded shafts 1350 yokes front and rear and cable shifters with 27 spline input for a th350 and the advanced adapters mounting plate but the foot has been cut off of it. The case has been on very few rides and the only reason I'm selling it is because im going to a 14 bolt front axle and a Scs case it's the new style case that can be swapped to driver or passenger drop.
$2800.00
The driveshafts are built out of 2" .250 wall Dom with spicer yokes and splines from a f250
One of them is 37.5 bottomed out the other is 50"
The shorter one has a rough spot on the fixed end where the u joint cap goes in but could be fixed with a dermal tool very easily $150.00 bucks each on the driveshafts
Located in dyersburg TN 38024
$2800.00
The driveshafts are built out of 2" .250 wall Dom with spicer yokes and splines from a f250
One of them is 37.5 bottomed out the other is 50"
The shorter one has a rough spot on the fixed end where the u joint cap goes in but could be fixed with a dermal tool very easily $150.00 bucks each on the driveshafts
Located in dyersburg TN 38024
