Fully built Losi Night Crawler...
Some of the parts are on the car, some are in spare parts containers. Also have all of the factory parts that the new parts replaced.
Parts purchased are as follows:
Losi Front Aluminum knuckles
Losi Front Aluminum inner C's with 20* caster
Losi 12mm Alum. hex's
Losi HD CV axles
Losi HD 21t worm gear sets
Losi HD Alum. drag link
Losi HD Alum. Tie rod
2 Losi HD Alum. 23t servo arms
New Losi Extra high torque Servo
Savox High Torque 277oz. in. Servo
Losi TiNi Steering king pins
CKRC "Link" Alum. double beadlocks
CKRC "OTA" steering kit
CKRC Black Alum. Servo Mounts
Losi 30T pinion gear
Losi 25T pinion gear
Misc. Losi Bolts and nuts
Misc. Losi Bearings for rear steer
Misc. Losi Set screws and pins
Pro-Line Interco 2.2 SuperSwampers w/memory foam
Also have:
Stock LNC beadlocks and tires
Two LiPo batteries, one 2c; one 3c
Losi 7mm Nut driver
Dynamite Allen set
Misc Husky plyers, soldering iron, and parts bag
Spektrum DX3C 3 channel TX/RX
Novak Rooster Crawler 55t motor and ESC
Castle BEC
Traxxas Aux fan for ESC
Thats all I can think of right now. I'm sure there's more misc. stuff that Im forgetting...
well over $1000 in parts/accessories not including the crawler
$900 plus shipping..
Some of the parts are on the car, some are in spare parts containers. Also have all of the factory parts that the new parts replaced.
Parts purchased are as follows:
Losi Front Aluminum knuckles
Losi Front Aluminum inner C's with 20* caster
Losi 12mm Alum. hex's
Losi HD CV axles
Losi HD 21t worm gear sets
Losi HD Alum. drag link
Losi HD Alum. Tie rod
2 Losi HD Alum. 23t servo arms
New Losi Extra high torque Servo
Savox High Torque 277oz. in. Servo
Losi TiNi Steering king pins
CKRC "Link" Alum. double beadlocks
CKRC "OTA" steering kit
CKRC Black Alum. Servo Mounts
Losi 30T pinion gear
Losi 25T pinion gear
Misc. Losi Bolts and nuts
Misc. Losi Bearings for rear steer
Misc. Losi Set screws and pins
Pro-Line Interco 2.2 SuperSwampers w/memory foam
Also have:
Stock LNC beadlocks and tires
Two LiPo batteries, one 2c; one 3c
Losi 7mm Nut driver
Dynamite Allen set
Misc Husky plyers, soldering iron, and parts bag
Spektrum DX3C 3 channel TX/RX
Novak Rooster Crawler 55t motor and ESC
Castle BEC
Traxxas Aux fan for ESC
Thats all I can think of right now. I'm sure there's more misc. stuff that Im forgetting...
well over $1000 in parts/accessories not including the crawler
$900 plus shipping..
