SewellsOffroad
Sewell's OffRoad
Located in Chattanooga,TN
SCX Chassis and skid.
RC4WD AR60 (Wraith) Aluminum Front and Rear Housings
RC4WD Lock outs, C's , and Knuckles
RC4WD Aluminum Truss/Upper Link Mounts front and rear.
Axial Upgraded Universal Front Axles
STRC Carrier Bearing Caps front and rear
STRC Front Steering Links
HR Diff Covers
NEW Fast Eddy's Upgraded Bearings
CKRC Steel Transmission Gears and Marine Grease
CKRC 40T Bevel Steel Gear set front (Over Driven)
Axial 38T Gear Set Rear (stock ratio)
Aluminum 106mm Axial Links on lowers
Custom Bent Uppers
New MIP Drive Shafts
Novak Goat 3s
Ballistic 18.5 Motor
RC4WD 6.0 Iroks for 2.2 Wheels
Axial Bead Locks
Crawler Innovation Medium Rear Foams and Softs front.
Custom Built Proline Shocks with valving and long stock shafts.
Losi White Springs
MG995 Servo
HD Aluminum Steering Arm
Spektrum DX3C Remote
Ive got about $1500 in this thing and is about one month on the build.
Currently has a Nice Dingo Body that has been trimmed to clear the extremely longer wheel base and larger tires.
All Plactic Parts have been upgraded or replaced with Aluminum.
Scale Tuff Truck Challenge Ready!
Looking to trade on :
Tig
Mig (Example Hobart 210 or Miller 175)
Plasma Cutter
Tube Bender with 1.75" Die (JD2 or?)
Tires ( 36" up to 38" Tsl or Iroks)
Coil Overs (12" 14")or Air Shocks
SCX Chassis and skid.
RC4WD AR60 (Wraith) Aluminum Front and Rear Housings
RC4WD Lock outs, C's , and Knuckles
RC4WD Aluminum Truss/Upper Link Mounts front and rear.
Axial Upgraded Universal Front Axles
STRC Carrier Bearing Caps front and rear
STRC Front Steering Links
HR Diff Covers
NEW Fast Eddy's Upgraded Bearings
CKRC Steel Transmission Gears and Marine Grease
CKRC 40T Bevel Steel Gear set front (Over Driven)
Axial 38T Gear Set Rear (stock ratio)
Aluminum 106mm Axial Links on lowers
Custom Bent Uppers
New MIP Drive Shafts
Novak Goat 3s
Ballistic 18.5 Motor
RC4WD 6.0 Iroks for 2.2 Wheels
Axial Bead Locks
Crawler Innovation Medium Rear Foams and Softs front.
Custom Built Proline Shocks with valving and long stock shafts.
Losi White Springs
MG995 Servo
HD Aluminum Steering Arm
Spektrum DX3C Remote
Ive got about $1500 in this thing and is about one month on the build.
Currently has a Nice Dingo Body that has been trimmed to clear the extremely longer wheel base and larger tires.
All Plactic Parts have been upgraded or replaced with Aluminum.
Scale Tuff Truck Challenge Ready!
Looking to trade on :
Tig
Mig (Example Hobart 210 or Miller 175)
Plasma Cutter
Tube Bender with 1.75" Die (JD2 or?)
Tires ( 36" up to 38" Tsl or Iroks)
Coil Overs (12" 14")or Air Shocks
