Badgeroo7
Member
Currie trophy truck axle. crane knuckles and C's ,dana 60 spindles and hubs,The WMS is 66 3/8 , it comes with 2 RCV stud shafts and 2 bells and a short side inner, one complete long side branik shafts cut for 50 degrees and Longfeild u joint, spare stub shaft and spare long side both Branik's cut for 50 degree steering,Warn drive flanges . Need wildwood type brakes , and 9" center section to complete.
$3,800
Contact email.
[email protected]
$3,800
Contact email.
[email protected]
