gomer pyle
Well-Known Member
- Joined
- Sep 6, 2008
- Messages
- 553
Chassis was built by Jimmy at Essentially Off Road
Axles
Rockwell front has ouverson engineering stock spline chromoly shafts and welded,
Rockwell rear has ouverson engineering 2 in. 47 spline shafts and spool,
Both have aluminum hubs,
Both have ouverson engineering pinion brakes and full hydro steering,
Both have been mohawked and flipped
Wheels and Tires
Usa 6x6 double bead lock wheels with inserts, 2.5 in. back spacing ,
49 Iroks (been rode 6 or 7 rides)
Suspension
Full four link
Aluminum links with 1 1/4in. x 1in. joints
18in. Bilsteins
Fox air bumps
130" wheel base
Engine
427 Small block Ford (Windsor 40 over)
Moly 4340 crank, Eagle h-beam rods, forged pistons, girdle
Procomp 200cc/72cc aluminum heads, stud girdle
Full MSD ignition with 6AL box and rev limiter
Aluminum intake with impco 425 propane setup
Aluminum radiator with electric fan in the back
High output alternator
Dual KRC steering pumps
Transmission and transfer
NP 435 four speed
NP 205 transfer, twin sticked and 1410 yokes
1410 drive shafts
Winch
Warn 9000
Seats and Harness
Corbeau racing seats
Crow 4 point harness
Buggy performs great, but I am about to get married and need money to buy a house. I have pics but don’t know how to post, so I can email them. Asking $30,000. Might be interested in a Toyota truck for trade.
615-653-0672
daniel
Axles
Rockwell front has ouverson engineering stock spline chromoly shafts and welded,
Rockwell rear has ouverson engineering 2 in. 47 spline shafts and spool,
Both have aluminum hubs,
Both have ouverson engineering pinion brakes and full hydro steering,
Both have been mohawked and flipped
Wheels and Tires
Usa 6x6 double bead lock wheels with inserts, 2.5 in. back spacing ,
49 Iroks (been rode 6 or 7 rides)
Suspension
Full four link
Aluminum links with 1 1/4in. x 1in. joints
18in. Bilsteins
Fox air bumps
130" wheel base
Engine
427 Small block Ford (Windsor 40 over)
Moly 4340 crank, Eagle h-beam rods, forged pistons, girdle
Procomp 200cc/72cc aluminum heads, stud girdle
Full MSD ignition with 6AL box and rev limiter
Aluminum intake with impco 425 propane setup
Aluminum radiator with electric fan in the back
High output alternator
Dual KRC steering pumps
Transmission and transfer
NP 435 four speed
NP 205 transfer, twin sticked and 1410 yokes
1410 drive shafts
Winch
Warn 9000
Seats and Harness
Corbeau racing seats
Crow 4 point harness
Buggy performs great, but I am about to get married and need money to buy a house. I have pics but don’t know how to post, so I can email them. Asking $30,000. Might be interested in a Toyota truck for trade.
615-653-0672
daniel