Sold/Expired J Truck 44, Flat Top Knuckles and HP HD Ford D44 Housing

[BMan]

J Truck Wide Track 44:
- Mostly complete hub to hub (no tie rod or drag link).
- Per the tag on pumpkin gears are 49 18 or 2.72's (I believe they haven't changed).
- Open
- 6 x 5.5
- Newer Mile Marker hubs
- WMS/WMS = 65"
- $100

Flat Top Knuckles
- Set of flat top knuckles that will work on any D44
- $45

HP HD Ford D44 Housing
- Bare housing only
- Diff cover has thicker metal plating about 2-3" wide going vertical.
- All brackets cut off.
SOLD

Pick up only.

[/u][/b]

 

[clintw]

do you still have the hp dana 44? if so where are you located im interested! thanks

 

[BMan]

do you still have the hp dana 44? if so where are you located im interested! thanks

Yes. I'm in Marietta GA

 

[clintw]

is the inside in decent shape or worth building ? the only reason i ask is im 3.5 hours away when would be a good time to pick it up?

 

[BMan]

is the inside in decent shape or worth building ? the only reason i ask is im 3.5 hours away when would be a good time to pick it up?

I was going to mesh some of the parts from the J truck (hubs, spindles and whatever else that would fit) but going a different route. The HP axle housing sat in my garage for a few years and I recently put it out under the deck. The J truck has been outside since I picked it up about a year ago. I've never opened it up but it has some oil in it so I would think it's nicely lubed and ok. I'm guessing new seals are a most and I can take some more pics if you'd like. I work from home so you can pick which ever one your interested in (assuming it's the HP HD 44) it up any time. I just found the set of stock shafts I have for it and I'll throw them into the offer for $100 for the housing and shafts if you or anyone else is interested. $50 on the shafts separately.

Let me know.

 

[clintw]

we are about to start heading that way, i just emailed you with a question.
Thanks

 

[clintw]

We are about to be in adairsville in about 15 min. I sent you an email with my number can u please call me I'm on my way. Thx

 

[clintw]

Will be in marietta in about 40 min

 

[clintw]

We are still in the area sitting a at a Walmart in north Marietta....

 

[clintw]

256-603-6590 is my cell

 

[BMan]

Damn Clint now I feel like a **** head! I wish I would've known you were coming or seriously interested in picking it up today before coming all this way! I haven't been around a computer since this morning. Another guy called me right after answering all the forum threads and PMs and said he is pretty sure he'll take it so I'm holding it until I back from him later today or tomorrow. After yapping with him I got busy teaching the boy and his friends how to weld and diagnosing the friends F250. I haven't checked this thread or PM messages here. :-[ Sorry you came all this way man!!! Here's what I'll do to show good faith if he backs out and your still interested. I'll meet you half way and throw in the shafts. I'll let you know when I know.



Sale Pending on HP HD D44 Housing.

 

[clintw]

Well I did not know of any other way to get a hold of you b/c you had no contact information Listed. I originally told you that i was interested and what time could I pick up? You told me any time was good, so I left shortly after that. Today is the only day I could come because of my work schedule.

 

[BMan]

Still for Sale

TTT

 

[BMan]

Updated and TTT