Sold/Expired Jeep granny low T-18 and Dana 20 with AA 32 spline output (Sold)

Hudson1 · Oct 26, 2015

6.32:1 first gear T-18 Jeep transmission. Complete. Set up with bell housing crank angle sensor to use behind a 4.0. Will mount to 360, 304, 4.2, or 4.0. Clutch and flywheel for 4.0 and or 4.2 included. Dana 20 with 32 spline Advance Adapters big output with speed sensor.
TMR mount for output. Edit: I will seperate. 250 for transfer case output and TMR mount. 300 if you want the case also. 350 for the transmission.
600.00 for all.
Knoxville, Tennessee

jworthen · Oct 26, 2015

Re: Jeep granny low T-18 and Dana 20 with AA 32 spline output

I'm interested in the tmr mount and the A A output shaft if you part it all out

GWBronco · Oct 27, 2015

Re: Jeep granny low T-18 and Dana 20 with AA 32 spline output

Good guy to deal with! bump it up.

Hudson1 · Oct 27, 2015

Re: Jeep granny low T-18 and Dana 20 with AA 32 spline output

Pm sent about output

cjthunder · Oct 28, 2015

Re: Jeep granny low T-18 and Dana 20 with AA 32 spline output

would you be willing to ship the transmission to southern Illinois 62832.

Hudson1 · Oct 28, 2015

Re: Jeep granny low T-18 and Dana 20 with AA 32 spline output

I figured I priced the tranny to make it worth the drive. I had an auto shipped from southern Illinois last year. If I remember, it was about 150.00.