30th6
Well-Known Member
1994 Jeep yj ***le in hand
Tubing is dom 1.75 x .120
120" wheelbase
Sbc 350 tbi crate engine
New th350 with maybe 3 hours on it,b&m shifter
Flipped 203 and Dana 300 clocked flat.
Flat belly, 3/8 skid plate.
Dana 60 front,rebuilt king pins,456 gears Detroit locker,35 spline crom outer shafts with drive flanges, stock 35 spline inner shafts.
High steer arms with knuckel tie in kit, heavy duty diff cover,disc brakes
14 bolt Detroit locker 456 gears ,ruff stuff diff cover, disk brakes
3/8 wall rear drive shaft
1/4 wall front drive shaft
Front and rear 4 link 3/4 heims upper and 7/8 on lower with 2" x 250 dom lower link and 1.50 x 250 dom upper link
Fox 2.0 coil overs from eor,with three rides maybe 8 hours of ride time 14 on front and 16 on rear with new limit straps
Full hydraulic steering works perfect, 1.50 x 250 dom and 7/8 heims
Cut 42 tsls on 32 bolt beadlocks
Suspension seats up front and new harness for passenger side.
New prp premie suspension seat and new harness in rear
Rci 2161a fuel cell
20" piper light bar
Smitty built 8K winch
Removable steering wheel
Cb
Marine radio with new wakeboard tower speakers.
I may be forgetting something , I don't have to sell so I'm firm on my price.
This is a point and shoot Buggy I just can't seem to make it to ride enough to justify keeping it.
$15,000 I have some new parts I had planned on installing I'll throw in if it sells.
Tubing is dom 1.75 x .120
120" wheelbase
Sbc 350 tbi crate engine
New th350 with maybe 3 hours on it,b&m shifter
Flipped 203 and Dana 300 clocked flat.
Flat belly, 3/8 skid plate.
Dana 60 front,rebuilt king pins,456 gears Detroit locker,35 spline crom outer shafts with drive flanges, stock 35 spline inner shafts.
High steer arms with knuckel tie in kit, heavy duty diff cover,disc brakes
14 bolt Detroit locker 456 gears ,ruff stuff diff cover, disk brakes
3/8 wall rear drive shaft
1/4 wall front drive shaft
Front and rear 4 link 3/4 heims upper and 7/8 on lower with 2" x 250 dom lower link and 1.50 x 250 dom upper link
Fox 2.0 coil overs from eor,with three rides maybe 8 hours of ride time 14 on front and 16 on rear with new limit straps
Full hydraulic steering works perfect, 1.50 x 250 dom and 7/8 heims
Cut 42 tsls on 32 bolt beadlocks
Suspension seats up front and new harness for passenger side.
New prp premie suspension seat and new harness in rear
Rci 2161a fuel cell
20" piper light bar
Smitty built 8K winch
Removable steering wheel
Cb
Marine radio with new wakeboard tower speakers.
I may be forgetting something , I don't have to sell so I'm firm on my price.
This is a point and shoot Buggy I just can't seem to make it to ride enough to justify keeping it.
$15,000 I have some new parts I had planned on installing I'll throw in if it sells.
