I have a new "Pro-Tools" 105 manual bender with 3 dies (1 1/4"-5"r, 1 1/4"-6"r & 1 1/2"-6"r all 240 degree) for sale. This bender has never been put together.
Listed below are links to everything I purchased new in 2010 most of which is still boxed up.
pro-tools.com
pro-tools.com
pro-tools.com
pro-tools.com
pro-tools.com
pro-tools.com
I also have 12 sticks of 2"x1/8"wall DOM tubing 11' and 12' lengths (I do not have the dies for this tubing)
I have roughly $2500 in the bender and would like to get $2000 out of it with the DOM tubing.
I'll take $500 for the DOM tubing if someone wants the tubing without the bender and dies. Otherwise it goes with the bender
Email me at [email protected]
Text me at 256-613-6140 for faster response
Listed below are links to everything I purchased new in 2010 most of which is still boxed up.
Manual Tube and Pipe Bender 105 Series Package (Heavy Duty)
Specs Round Tube Minimum Outside Diameter (OD): 1/2" (12.7 mm) Maximum Outside Diamter (OD): 2" (50.8 mm) Minimum Wall Thickness: Depends on Die (See Die Charts) Maximum Wall Thickness: 0.134" Pipe Minimum Size: NPS 1/4 (DN 8) Maximum Size: NPS 1-1/2 (DN 35) Note: Our benders are...
pro-tools.com
180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-1/4" OD, 5" CLR)
Specs Outside Diameter of the Tubing (OD): 1-1/4" (31.8 mm) Minimum Wall Thickness (DOM): 0.058" (1.5 mm) Minimum Wall Thickness (4130): 0.058" (1.5 mm) Minimum Wall Thickness (ERW): 0.065" (1.7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum)...
pro-tools.com
180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-1/4" OD, 6" CLR)
Specs Outside Diameter of the Tubing (OD): 1-1/4" (31.8 mm) Minimum Wall Thickness (DOM): 0.058" (1.5 mm) Minimum Wall Thickness (4130): 0.058" (1.5 mm) Minimum Wall Thickness (ERW): 0.065" (1.7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum)...
pro-tools.com
180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1-1/2" OD, 6" CLR)
Specs Outside Diameter of the Tubing (OD): 1-1/2" (38.1 mm) Minimum Wall Thickness (DOM): 0.065" (1.7 mm) Minimum Wall Thickness (4130): 0.065" (1.7 mm) Minimum Wall Thickness (ERW): 0.083" (2.1 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum)...
pro-tools.com
105 SD/HD Bender Degree Ring with Stop and Pointer Assembly
Description Use with our 105 Heavy Duty tube bender for dialing in your degrees of bend. Accurate to a fraction of a degree Adjustable stop makes repeat bends accurate and easy Fixed positioning-no knocking it out of position Machined from 1/4" steel plate for durability Lead Time Lead times...
pro-tools.com
105 SD/HD Bender Stand
Description The 105 Stand provides a convenient mounting point for either our 105 Heavy Duty tube bender. Note: Requires mounting to a concrete floor. Lead Time Lead times vary by product. Many orders can ship out within a few days, but to make sure we offer our highest quality, some items our...
pro-tools.com
I also have 12 sticks of 2"x1/8"wall DOM tubing 11' and 12' lengths (I do not have the dies for this tubing)
I have roughly $2500 in the bender and would like to get $2000 out of it with the DOM tubing.
I'll take $500 for the DOM tubing if someone wants the tubing without the bender and dies. Otherwise it goes with the bender
Email me at [email protected]
Text me at 256-613-6140 for faster response
Last edited:
