whiskeymakin
Well-Known Member
the back half of the frame was cut off and fitted with square tube
118" wb
5.3 with plenty of power, howell harness, flex fuel engine. 2 in 1 exhaust with a flowmaster
Advance adapters ls1 swap radiator for a jeep. and electric fan
new red top optima
2.25 7075 aluminum links with 1.25 joints uppers and lowers
60 front 4.56 gear welded with warn flanges 35 spline axles. trussed, highsteer with EAGLE machine ram
14 bolt rear 4.56 welded, pinion guard, trussed
new 44" Tennessee cut TSL swampers on rockathons
th350 all new guts built by mike blackburn, 2400 b&m stall, big cooler with a fan mounted under the rear of the jeep, dirt car shifter
stak case with 3.75 gear with rear support bracket
1410 joints everywhere
new corbeau seats on the jeep sliders, and harnesses
8248 fuel pump with corvette filter
rci tank that sits on rubber isolators to keep it from ever cracking
autometer gauges...trans temp, water, oil press, volts, tach
2.5 fox air shocks 16 or 18" i cant remember
brand new warn 9500 powerplant winch with air and all the accessories
most everything has -an fittings and high pressure hose
highline fenders and cut down hood
this thing needs nothing, ready to hit the woods
Located in columbia tn
25k
Call chris @ 931 808 1600
118" wb
5.3 with plenty of power, howell harness, flex fuel engine. 2 in 1 exhaust with a flowmaster
Advance adapters ls1 swap radiator for a jeep. and electric fan
new red top optima
2.25 7075 aluminum links with 1.25 joints uppers and lowers
60 front 4.56 gear welded with warn flanges 35 spline axles. trussed, highsteer with EAGLE machine ram
14 bolt rear 4.56 welded, pinion guard, trussed
new 44" Tennessee cut TSL swampers on rockathons
th350 all new guts built by mike blackburn, 2400 b&m stall, big cooler with a fan mounted under the rear of the jeep, dirt car shifter
stak case with 3.75 gear with rear support bracket
1410 joints everywhere
new corbeau seats on the jeep sliders, and harnesses
8248 fuel pump with corvette filter
rci tank that sits on rubber isolators to keep it from ever cracking
autometer gauges...trans temp, water, oil press, volts, tach
2.5 fox air shocks 16 or 18" i cant remember
brand new warn 9500 powerplant winch with air and all the accessories
most everything has -an fittings and high pressure hose
highline fenders and cut down hood
this thing needs nothing, ready to hit the woods
Located in columbia tn
25k
Call chris @ 931 808 1600
