Indy Will
Well-Known Member
This car was built just a few months ago for KOH 2010 at Right Side Performance in Burlington, NC:
Link to half-assed build thread right here.
Too many things to list but here's a start.
Right Side Performance 1.75" DOM chassis - 4 link front and rear
Lower links heated treated chromo
Uppers 1.5" aluminum
450hp LS
4L80e with go fast mods (not your ordinary 4L80...:smokin
Atlas
Driveshafts by Oliver's Custom Dshafts in Winston Salem, NC, with spare
Hi9 spool front
Strange9 ARB rear
Spidertrax knuckles, housing ends, brakes
Ruff stuff housings
Wilwood/CNC master cylinders/cutting brakes
Has about 47degrees of steering
Superior/Branik shafts with spares
32 gallon Jaz fuel cell w/ dual internal pumps and walbro pickups
Radflo 2.0" coilovers with BlueCoils
Radflo 2.5" triple bypasses
Radflo 3" air bumps
14" front wheel travel
21" rear wheel travel
PCI Race Radio intercom/radio system
Lots more I'll work on the list...
This car was put together for this years race. Unfortunately we had a hydro line let go (cheap fitting...my fault) early in the race and then were taken out at mile 118 by a brand new blown alternator. This thing right out of the box would hang at 65 mph in the rough stuff (which it could've gone faster...that's just as fast as I could brave it:flipoff2. After a little time with the Radflo guys it could/can (maybe is already - I know we hung with Shannon's IFS car for a few miles passing people before the hydro line blew) easily hang with the fastest cars out there.
Race ready - complete tear down, paint, rebuild and race prep (bring your own helmet and you're ready) - $79,000
-Or-
I'll sell it as a roller which includes only the following:
Chassis
Upper and lower links w/ rod ends
Front and rear axles with brakes, unit bearings, shafts, steering arms, steering ram and linkage
Sheet metal - firewalls, floors, roof...
Radflo 2.0 coilovers and springs
Radflo 2.5 triple bypasses
Radflo air bumps
-$22,000
For more information call me: Will at 336.693.4003
Link to half-assed build thread right here.
Too many things to list but here's a start.
Right Side Performance 1.75" DOM chassis - 4 link front and rear
Lower links heated treated chromo
Uppers 1.5" aluminum
450hp LS
4L80e with go fast mods (not your ordinary 4L80...:smokin
Atlas
Driveshafts by Oliver's Custom Dshafts in Winston Salem, NC, with spare
Hi9 spool front
Strange9 ARB rear
Spidertrax knuckles, housing ends, brakes
Ruff stuff housings
Wilwood/CNC master cylinders/cutting brakes
Has about 47degrees of steering
Superior/Branik shafts with spares
32 gallon Jaz fuel cell w/ dual internal pumps and walbro pickups
Radflo 2.0" coilovers with BlueCoils
Radflo 2.5" triple bypasses
Radflo 3" air bumps
14" front wheel travel
21" rear wheel travel
PCI Race Radio intercom/radio system
Lots more I'll work on the list...
This car was put together for this years race. Unfortunately we had a hydro line let go (cheap fitting...my fault) early in the race and then were taken out at mile 118 by a brand new blown alternator. This thing right out of the box would hang at 65 mph in the rough stuff (which it could've gone faster...that's just as fast as I could brave it:flipoff2
. After a little time with the Radflo guys it could/can (maybe is already - I know we hung with Shannon's IFS car for a few miles passing people before the hydro line blew) easily hang with the fastest cars out there.Race ready - complete tear down, paint, rebuild and race prep (bring your own helmet and you're ready) - $79,000
-Or-
I'll sell it as a roller which includes only the following:
Chassis
Upper and lower links w/ rod ends
Front and rear axles with brakes, unit bearings, shafts, steering arms, steering ram and linkage
Sheet metal - firewalls, floors, roof...
Radflo 2.0 coilovers and springs
Radflo 2.5 triple bypasses
Radflo air bumps
-$22,000
For more information call me: Will at 336.693.4003
