Ive got a samurai build thats been sitting in my shop for quite awhile. I picked it up when I sold my last rockwell buggy as something to mess around with until I could get the buggy i wanted under works, Im working on that buggy and the samurai is just sitting.
Frame/Body:
about 4 feet of samurai frame
tubed back half and part of the front
Samurai Hood, highly cut fenders, windshield and dash
Axles:
Wagoneer D44s F/R
Rockcrusher drive flanges
Stock Gears
Have Yukon 5.38s and spools for F/R New in box
New in box rockcrusher Diff covers F/R
Disk Brakes F/R rears all brand new assembly
Suspension:
FRONT:Radius Arm setup with new fox air rides 14"
REAR: Tringulated 4link with buggy leafs
Engine/Trans/Transfer:
4.3 Vortec With Painless Harness
th350 fresh rebuild. magnesium pan
sami case with stronger output (unsure of brand or specs)
case is in custom crossmember that armors the whole transfer case
Wheels/Tires:
39.5 Boggers 2 rears are good 2 fronts arnt
new Allied Beadlocks
Misc:
Orbital and Hydraulic ram with lines
Auto meter gauges
Painless Harness
art car shifter
Brand New aluminum fuel cell with snowmobile pickups in tank
Brand New aluminum radiator
Reese hitch receiver welded to chassis F/R for removable winch
Two seats with covers and 4point harnesses
Extras:
spare 4.3
spare transfer case
all parts to make your driveshafts minus the tubes
windshield
all heat/air parts for sami if you wanna fool with that
and anything else I find in the boxes of stuff
The buggy needs some wiring, driveshafts, steering put on, and gears installed
Im looking to get $10,500 for it but will take first reasonable offer
I will take partial trade on set of 44 boggers, 47 LTBs
Located in Western North Carolina
828-508-2559
Frame/Body:
about 4 feet of samurai frame
tubed back half and part of the front
Samurai Hood, highly cut fenders, windshield and dash
Axles:
Wagoneer D44s F/R
Rockcrusher drive flanges
Stock Gears
Have Yukon 5.38s and spools for F/R New in box
New in box rockcrusher Diff covers F/R
Disk Brakes F/R rears all brand new assembly
Suspension:
FRONT:Radius Arm setup with new fox air rides 14"
REAR: Tringulated 4link with buggy leafs
Engine/Trans/Transfer:
4.3 Vortec With Painless Harness
th350 fresh rebuild. magnesium pan
sami case with stronger output (unsure of brand or specs)
case is in custom crossmember that armors the whole transfer case
Wheels/Tires:
39.5 Boggers 2 rears are good 2 fronts arnt
new Allied Beadlocks
Misc:
Orbital and Hydraulic ram with lines
Auto meter gauges
Painless Harness
art car shifter
Brand New aluminum fuel cell with snowmobile pickups in tank
Brand New aluminum radiator
Reese hitch receiver welded to chassis F/R for removable winch
Two seats with covers and 4point harnesses
Extras:
spare 4.3
spare transfer case
all parts to make your driveshafts minus the tubes
windshield
all heat/air parts for sami if you wanna fool with that
and anything else I find in the boxes of stuff
The buggy needs some wiring, driveshafts, steering put on, and gears installed
Im looking to get $10,500 for it but will take first reasonable offer
I will take partial trade on set of 44 boggers, 47 LTBs
Located in Western North Carolina
828-508-2559
