whiskeymakin
Well-Known Member
ill probably catch hell for posting this.....but im throwing this out there for now
i know im going to leave some stuff out, so feel free to ask any questions.
im putting this up for sale before i take it to the woods for the first real beating. figured it would have its best shot at getting sold if its still fresh.
everything is new except the transfer case and 2 rear tires
roof panels and exhaust will be done this week.....hopefully
asking $28,000 obo
Located in tullahoma, tn 37388
wheelbase is 125"
belly 24"
highest point on cage 69"
interior width door to door 40" (its tight)
chassis tubing is a mix of hrew and dom. 1.75"
3/8" full belly skid from oil pan to rear 6061 aluminum
1/4" 6061 roof panels
all AEROQUIP braided hoses and fittings
ANTIROCK swaybar
8k pound winch with brand new amsteel blue rope
rockwell steering axles POS rear control (electric joystick to hydro from the ps pump)
fresh 400 sbc. destroked to 377. bored .40 over new flat top pistons that are the correct height for the crank, trick flow alum. heads completely rebuilt, custom grind cam. it runs like a raped ape. very strong motor. just had first oil change, stainless headers into a single chamber flowmaster. will turn 6500 all day if needed
AFCO 31x20 alum double pass radiator
autometer ultra light guages trans temp, volts, oil pres, water temp
MSD ignition with soft touch rev control
fresh th350/ np 205
kirkey seats, RCI belts ( 15"ers) who ever is interested needs to be pretty small around 150-250 max and no taller than 6'3". this thing is very small inside
double beadlocks / 44" tsls
2.5 x 16" fox airs
2" dom .25 wall uppers and lowers with 1" heims
wilwood brake pedal. billet gas pedal
thats all i can think of right now heres some pics.....
i know im going to leave some stuff out, so feel free to ask any questions.
im putting this up for sale before i take it to the woods for the first real beating. figured it would have its best shot at getting sold if its still fresh.
everything is new except the transfer case and 2 rear tires
roof panels and exhaust will be done this week.....hopefully
asking $28,000 obo
Located in tullahoma, tn 37388
wheelbase is 125"
belly 24"
highest point on cage 69"
interior width door to door 40" (its tight)
chassis tubing is a mix of hrew and dom. 1.75"
3/8" full belly skid from oil pan to rear 6061 aluminum
1/4" 6061 roof panels
all AEROQUIP braided hoses and fittings
ANTIROCK swaybar
8k pound winch with brand new amsteel blue rope
rockwell steering axles POS rear control (electric joystick to hydro from the ps pump)
fresh 400 sbc. destroked to 377. bored .40 over new flat top pistons that are the correct height for the crank, trick flow alum. heads completely rebuilt, custom grind cam. it runs like a raped ape. very strong motor. just had first oil change, stainless headers into a single chamber flowmaster. will turn 6500 all day if needed
AFCO 31x20 alum double pass radiator
autometer ultra light guages trans temp, volts, oil pres, water temp
MSD ignition with soft touch rev control
fresh th350/ np 205
kirkey seats, RCI belts ( 15"ers) who ever is interested needs to be pretty small around 150-250 max and no taller than 6'3". this thing is very small inside
double beadlocks / 44" tsls
2.5 x 16" fox airs
2" dom .25 wall uppers and lowers with 1" heims
wilwood brake pedal. billet gas pedal
thats all i can think of right now heres some pics.....
:****:
![IMG_3652[1].JPG](https://cdn.hardlinecrawlers.com/xfmg/thumbnail/4/4977-89909798ecaea1f81f71948203478510.jpg?1625928498)
