Sold/Expired Toyota Knuckles/Spindles/Stock axle shafts (Birf and long and short)

[matth_85]

I have 4 Knuckles. Two are FJ-62 knuckles but will bolt up to a mini truck axle. Just look slightly different. $50 Ea. 2 RH/2LH
2 Spindles. All threads are good. No bad wear $50 ea
Birfs with long or short side. $75ea

Also have a bare housing that would be good for someone going all out or with a bent one. $75

All Located in Greenwood, SC
PM/Call/TXT 864-871-0444

 

[Neal3000]

Hope you don't mind me adding this but i have all the disk brake parts that one would need to go with your axle parts

http://www.hardlinecrawlers.com/forums/index.php?topic=24189.msg294222#msg294222

 

[Griffin]

Is that a 62 front or rear housing?

 

[matth_85]

Sorry, its a mini truck front axle.

No issue on adding...I also have one straight axle hub assembly with a rotor if someone needs that.