Sold/Expired Toyota LandCruiser D-Shafts and shaft parts

[Neal3000]

For Sale-

two driveshafts (from a FJ40) these look awful but are actually in great shape and the joints and slips move freely with no play, bigger u-joints than a mini-truck shaft, just retube and drill your pinion flange......$50 each

4x random LC slip yokes, these are all from 60/62 or early 80 series but i've lost track of what they came out of. These would be a nice upgrade on one end of a minitruck driveshaft, slip shafts are the same diameter and spline count but you get a bigger u-joint, just have to redrill your pinion or t-case flange- $25 each

27 spline pinion flange- $15

 

[clemsonjeep]

So does that make the flanges the small or large bolt pattern?

 

[Neal3000]

Its larger than the mini-truck pattern

 

[TBItoy]

So does that make the flanges the small or large bolt pattern?

It's a large pattern, beef ujoint and yokes for sure.

They are basically 1350 size u joints (cross is same size, caps are actually a little bigger)

 

[Neal3000]

So does that make the flanges the small or large bolt pattern?

If your asking about the flange in the pic it is off of a 8" diff but it's already double drilled for a LC yoke flange.

Theres plenty of meat on a 8 or 9.5 pinion flange as long (as it's a round one) to double or even triple drill them for different yoke flanges

 

[Neal3000]

TTT

 

[Neal3000]

Someone make me an offer on this stuff!