• Help Support Hardline Crawlers :

Trail gear housings and 05+ super duty stuff

Indy Will

Well-Known Member
Joined
Aug 7, 2008
Messages
219
Location
Burlington, NC
Trail Gear 9"/10" Housing cut for driver side drop (specifically a wrangler). Plenty wide still for around a 70" WMS with 05+ ford stuff. - $700

Trail Gear 9"/10" Housing. Not cut. -$700

Crane Axle 05+ Unit bearing rear cups. -$500

Busted Knuckle 05+ light weight brake kit. New in box. 2 sets (4x rotors, calipers, brackets, etc) - $600/kit

05+ set of factory inner and outer knuckles. Cut and cleaned ready to weld on. $300

Jessie Haines Fab weld on high steer kit Full hydro (no drag link hole) -$175

Jesse Haines Fab weld on high steer kit crossover (with drag link hole) - $175

All in Gibsonville NC.
 

Attachments

  • 52E5FAB6-8764-431B-9218-877D50E084C8.jpeg
    52E5FAB6-8764-431B-9218-877D50E084C8.jpeg
    67.9 KB · Views: 121
  • A23530B2-7323-4B0E-B850-E2CA82A8CDB8.jpeg
    A23530B2-7323-4B0E-B850-E2CA82A8CDB8.jpeg
    40.5 KB · Views: 105
  • 4CDE6A4C-AE6D-4C13-8289-D9A255B7CD61.jpeg
    4CDE6A4C-AE6D-4C13-8289-D9A255B7CD61.jpeg
    51.6 KB · Views: 113
  • 6D551784-E6A4-49A4-BE14-24686A05658D.jpeg
    6D551784-E6A4-49A4-BE14-24686A05658D.jpeg
    108.2 KB · Views: 114
  • DCB1E1B0-8F43-4F3C-9023-D577E1ED7020.jpeg
    DCB1E1B0-8F43-4F3C-9023-D577E1ED7020.jpeg
    123.1 KB · Views: 113

Latest posts

Top